Jump to content

togrilo

New Member
  • Posts

    3
  • Joined

  • Last visited

Everything posted by togrilo

  1. Hi kezsir, I used this Conectores de fiação sinal de volta da motocicleta, 4 unidades, adaptador de plugue para yamaha yzf r6 r1 r3 r6s fz6 fzs6 fz1 250 500 600|adapter plug|adapter 12vadapter yamaha - AliExpress Compre Fácil, Viva Melhor! Aliexpress.com I disassembled and removed the temperature selector leaving only the two wires that are fixed in the grip(resistance) and I screwed the cover back. This two wires from the resistance I welded each one on a wire from the connector. The right grip, I only welded the two wires on the wires from the connector. You need know that there are two factory connectors, one for each grip and each factory connector there are two wires one for each wire from the resistance. When the resistance is correctly connected on the factory connectors the heater grips menu will be able. If I wasn't clear, please feel free to ask any question.
  2. Hey guys, just sharing information. I installed this heated grips using the factory wire and it works fine wit ECM menu. I removed the temperature selector and wired the ground and positive from each grip into the factory connectors. Lmodri universal motocicleta 7/8 "22mm elétrico aquecido apertos scooter ciclomotor barra mão mais quente ajustável aperto quente 12v par|Exercit.| - AliExpress Compre Fácil, Viva Melhor! Aliexpress.com
  3. Are there another brand of these grips from china that works? Because, in Brazil is more difficult and expensive then buy from EUA. Like this one: 12v punho de aquecimento elétrico da motocicleta, kit de alças aquecidas + fita resistente ao calor + cobertura resistente ao calor, almofada do guidão|Exercit.| - AliExpress Compre Fácil, Viva Melhor! Aliexpress.com But there are just two wires and the Heat Demon heaters have three. So, I don't know if work as the same way =/ Thanks
×