Jump to content

OEM connectors for installing PowerLet


Rdecae81

Recommended Posts

so I have removed the front windshield, and I have removed the left side OEM receptacle.  Need to install a powerlet female receptacle

the powerlet is WAY smaller in diameter, what has anyone used as a filler?

also I want to use the OEM connetor, but do not want to cut the original oem wire from the oem receptacle

anyone have the part number for the required receptacle for all three items behind the windshield.  in this picture

99

100

101

102

it appears 99 & 100 maybe identical.  cannot tell if 101 & 102 are identical.

 

 

Tracer900GTconnectors.jpg

Edited by Rdecae81
Link to comment
Share on other sites

2 hours ago, Rdecae81 said:

also I want to use the OEM connetor, but do not want to cut the original oem wire from the oem receptacle

anyone have the part number for the required receptacle for all three items behind the windshield. 

I have a video on my YT channel that has all the information you are looking for and the part is linked in the Description of the video.

Regards, Grumpy Goat | 2019 Yamaha Tracer 900 GT & 2016 BMW R1200RS

Link to comment
Share on other sites

thanks, so I watched the video twice, and looked at all the comments.  I admit I am not a youtube user.  so , where is the link to the part you purchased?  or the part number?  I was expecting a link or part number in the comments section or maybe at the end of the video.  sorry I am probably missing something, but I did watch it twice.  and Yes for the two grey connectors your item is exactly what I am looking for. Still need a connector for the black plug, but if I can get the link to what you purchased that solves 50% of my problem.  thank you

Link to comment
Share on other sites

  • Supporting Member
24 minutes ago, Rdecae81 said:

thanks, so I watched the video twice, and looked at all the comments.  I admit I am not a youtube user.  so , where is the link to the part you purchased?  or the part number?  I was expecting a link or part number in the comments section or maybe at the end of the video.  sorry I am probably missing something, but I did watch it twice.  and Yes for the two grey connectors your item is exactly what I am looking for. Still need a connector for the black plug, but if I can get the link to what you purchased that solves 50% of my problem.  thank you

He put everything in the description located right below the video.

LINKS

Mounting Hardware ----------------- RAM Mounts Handlebar U-Bolt Base for Rails 0.5" to 1.25" in Diameter RAM-B-231ZU ($17.49) : https://tinyurl.com/pjrvnsrk

RAM Mounts RAP-B-201U-A Composite Double Socket Arm - Short Arm Compatible ($9.49) : https://tinyurl.com/8ndsepzx

ARKON 25mm Ball to 17mm Ball Adapter - Black - SP25MM17 ($5.95) : https://tinyurl.com/ham3ppck

Garmin Automotive suction cup mount ($46.02) : https://tinyurl.com/dd28bns3

Wiring and Connectors needed ----------------------------

EDO Tech Direct 12V Hardwire Car Mount Charger Cable Adapter Kit ($7.00) : https://tinyurl.com/2xdtb9bj

New Accessory Power Lead Kit For Yamaha Wolverine RMAX & 850 X2 X4 RMAX2 RMAX4 ($17.29) : https://www.ebay.com/itm/203507679385

Other -----

Rain Weather Cover/Cap for Garmin Zumo 660 665 BMW Navigator IV RoadTech Cradle ($34.99) : https://www.ebay.com/itm/254539866683

Garmin Zumo XT ($500) : https://buy.garmin.com/en-US/US/p/679804

All links are provided for the convenience of viewers. None are affiliate links, and consequently I receive no remuneration from use of these links. GENERAL DISCLAIMER All content and opinions offered on this Channel are my own. Where products are reviewed, they would have been purchased my me for my own use, unless stated otherwise. I have not been sent any products in exchange for reviews, favourable or otherwise.

  • Thumbsup 1

***2015 Candy Red FJ-09***

Link to comment
Share on other sites

  • Supporting Member
3 hours ago, Rdecae81 said:

 I admit I am not a youtube user.  so , where is the link to the part you purchased?  sorry I am probably missing something, but I did watch it twice.

Just for your future reference - this is probably what you were missing..  click on the SHOW MORE option and all will be revealed.

image.thumb.png.e7d5bca794d8378d669759867b72a260.png

Link to comment
Share on other sites

Thanks to all who assisted Rdecae81 with the YT navigation ... saved me from doing it. 🙂

Rdecae81 - Looks like you are good to go. Good luck with the DIY installation. Now that you know a bit more about YT, check out the other videos on my channel ... there may be others that you might find useful as you work on your Tracer 900 GT. Also don't forget to hit the "Like" and consider subscribing as it helps out the channel and encourages me to make more content.

Regards, Grumpy Goat | 2019 Yamaha Tracer 900 GT & 2016 BMW R1200RS

Link to comment
Share on other sites

already did both, thanks, and for those wondering per this picture

Tracer900GTconnectors.jpg

this is for items 99 & 100

https://www.ebay.com/itm/203507679385

so far I have only found this for items 101 & 102,

2SC-8254B-00-00

https://www.ronayers.com/oemparts/a/yam/5b27c67587a8661118ea0061/electrical-1

see part number 30.   It is OEM yamaha, but includes the cigarette lighter as well and runs 40.00.  obviously, you can cut the wires at the cigarette lighter and have a "pigtail" to use for powering other items.  Still trying to find a connector similar to what was found for 99 & 100.  No luck so far.  But as of now, I really do not need one.

 

Overall I have chosen a different route

I am using 99 to run a "trigger" wire to my PDM-60.  this fuze panel has both triggered and always on options.

so I will then run wires from the PDM-60 as follows

Powerlet on left side panel in the wire mesh area (basically to run a mini air compressor or other emergency item)

Powerlet on Left side front panel (replaced OEM cigarette lighter)

USB/Volt meter on Right side (using the empty OEM bracket)

Power to my Phone holder (has wireless charge capability)

Power to Gerbing plug (Left side) 

Power to LED (probably denali R1) running lights

In this way I will not be using the OEM connectors/wiring harness in any way (other than the trigger to PDM-60)

I have created a wiring loom, with all the wires color coded

Black = all ground wires

yellow = trigger wire

Green = left side panel powerlet (15 amp)

Purple = LED running lights (7.5 amps)

Blue = front dash Left PowerLet receptacle (Garmin XT) (5 amp)

White = Front Dash Right USB/Volt Meter (5amps)

Purple = Phone holder power (5 amps)

the gerbing connector has it's own wiring (10amps)

I can never use the 15amp powerlet if the Gerbings is being utilized, but otherwise there is no problem running all these powered items.

 

 

Edited by Rdecae81
  • Thumbsup 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×