LED turn signals

[Traveler Thomas]

I changed out my factory turnsignals to sequential led lights. The kit came with 4 lights and four 10w resistors. I did the front ones first and everything worked fine, after doing the rear lights I got a really weird flashing sequence, the lights would not flash all the way across. Does anybody have any ideas how to resolve this issue?

[miweber929]

46 minutes ago, Traveler Thomas said:

I changed out my factory turnsignals to sequential led lights. The kit came with 4 lights and four 10w resistors. I did the front ones first and everything worked fine, after doing the rear lights I got a really weird flashing sequence, the lights would not flash all the way across. Does anybody have any ideas how to resolve this issue?

Remove the resistors and replace the flasher with an LED capable solid state unit. 

I think 4 resisters may be too many but it’s hard to tell. Replacing the flasher relay is a guaranteed fix. 

Edited December 15, 2022 by miweber929

[RaYzerman]

To get sequentials to work, you'll have to slow the flash rate down some more.  You could try more resistors, however, a proper LED capable flasher might be a necessity.  I'd go for that first.

[Traveler Thomas]

Thank you for the help, I purchased a TST adjustable T/S relay!