Jump to content

Faring removal and flush signals mount


tfj09

Recommended Posts

Could someone who has removed the front / side faring for install of flush mount signals provide photos and / or detailed descriptions of the process.
 
Seems there are some clips as well as fasteners for the faring and I really would rather not snap anything.
 
Thanks!
 
Link to comment
Share on other sites

Funny enough, I just did this last night.  Pull the whole fairing off, and unscrew the two black screws.  After those are out, simply pry off the  4 silver circle clips with teeth on them with a small flat bladed screwdriver, but don't break them because you'll have to reuse them. Once those are off, the two halves of the fairing come right apart.  When you put the fairing back together, make sure it pops back together all the way before reinstalling the circle clips.  Hope this helps!!
Link to comment
Share on other sites

  • Premium Member
Check out this how to link for a related procedure. It shows pictures of the fairing removal.
linky
 
A government which robs Peter to pay Paul can always depend on the support of Paul.
George Bernard Shaw (1856-1950)
Bikes:
2015 FJ-09, Seat Concepts seat cover and foam, Cal Sci medium screen, rim stripes, factory heated grips, Cortech Dryver tank bag ring, Modified stock exhaust, FlashTune with Graves fuel map, Cree driving lights, Aux power socket.
2012 Street Triple type R (Wifes)
2007 FJR1300 (Sold!)
 
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×