Common Torque spec reference thread

[sixcharlie]

Brake calipers:
Front: 35 Nm / 25 ft-lbf Rear: 27 Nm / 20 ft-lbf
 
Brake caliper bleeder screw: 5 Nm / 3.6 ft-lbf
 
Axle bolts?:
Front: 65 Nm / 47 ft-lbf
Rear: 150 Nm / 108 ft-lbf
 
Handlebar:
Upper bolt: 22 Nm / 16 ft-lbf Lower nut: 40 Nm / 29 ft-lbf
 
Fork Triple Clamps:
Upper: 26 Nm / 19 ft-lbf Lower: 23 Nm / 17 ft-lbf
 
Exhaust Bolts:
20 Nm / 14 ft-lbf
 
Steering Stem Nut:
In order of Assembly:
Lower: 52 Nm / 38 ft-lbf, then loosen completely, then 18 Nm / 13 ft-lbf
Cap: 110 Nm / 80 ft-lbf
 
Engine Mount Bolts (also useful for adding frame sliders)
Front upper and Lower bolts: 45 Nm / 33 ft-lbf
Rear lower side nut: 45 Nm / 33 ft-lbf
Rear upper nut: 45 Nm / 33 ft-lbf
 
Subframe Bolts: 50 Nm / 36 ft-lbf
 
Oil Filter: 17 Nm / 12 ft-lbf
Drain Bolt: 43 Nm / 31 ft-lbf
Filler cap: 1.5 Nm / 1.1 ft-lbf
 
Rear shock Upper/Lower: 44 Nm / 32 ft-lbf
 
Any requests?  
 
 

[theyalg]

Are the torque values for the bottom bolt of the bracket for the rear brake and shifter the same as the subframe assembly 50 Nm / 36-ft-lbf?