Premium Member fr8dog Posted April 8, 2019 Premium Member Share Posted April 8, 2019 Installed chain and sprockets on Saturday. Easier to do than expected. The Motion Pro tool is great. I also purchased a digital caliper to measure the width as I went along. Still waiting on the Nitron shock. Tired of waiting. Bike has been down for two weeks. Put everything back together and went for a ride yesterday. Low 70's here. Perfect. 1 Link to comment Share on other sites More sharing options...
Ahmed Posted April 8, 2019 Share Posted April 8, 2019 Oil and filter and some adjustments .....nothing interesting to show on an oil change but I thought you might be interested to know that the oil change kit will fit in the side case more updates to come ...... 1 Link to comment Share on other sites More sharing options...
Premium Member coachluciano Posted April 8, 2019 Premium Member Share Posted April 8, 2019 On 4/5/2019 at 10:10 PM, chesterburnet said: 2015-2017 Yamaha FJ-09 Blaster-X Integrated LED Tail Light – Custom LED WWW.CUSTOMLED.COM Don't forget the splitters if you want to use with the stock turn signals. I used both and so I didn't need the relay. I'm guessing that if you use an aftermarket turn signal or eliminate the stock signals you'll need to use the relay. I ordered LED turn signals from TST today so I'll know the answer to that shortly. Where in NH are you. I work for a company in Salem NH but not at that location. Yamaha FJ-09 Integrated LED Tail Light and Turn Signal with Blaster-X, Brake Alert, Turn Alert and Strobe mode! Fits years 2015 2016 2017 FJ-09. Top... Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair) – Custom LED WWW.CUSTOMLED.COM Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair), fits Yamaha Motorcycles Turn Signal Connector. Don't hack up your OEM harness! Use... I just ordered on myself yesterday. Should have it Wednesday. After all the money I have spent bringing this bike up to my standards, this purchase was a no-brain-er. 2015 FJ-09 - Andreani Cartridges, Ohlins 535 Rear Shock, LightTech Chain Adjusters, Yoshi Fender Eliminator, Blaster-X Integrated Tail Light/Blinkers, Full Yoshi Exhaust, Ivan's Flash, Bagster Seat, Rizoma: (Bar, Grips, Bar Ends, Mirrors, Oil Cap, Rear Pegs) Bremob Corsa Corta Master Cylinder, Bremob RCS19 Hadraulic Clutch, GPR Steering Damper, Speigler Hydraulic Lines, EBC Brake Pads, Puig Screen, HealTech Quick Shifter, MPG Rearset, XSR900 Slipper Clutch, Driven Racing Halo Gas Cap, SW-Motch Front / Rear Axel Sliders, R1 Rotors / 320mm Kit Conversion. Link to comment Share on other sites More sharing options...
Ahmed Posted April 9, 2019 Share Posted April 9, 2019 My friends in the north that want to go out ride while its still cold, this one is for you 4pcs Universal Carbon Fiber Car Heated Seat Heater Pads Kit High Low Temp Switch | eBay WWW.EBAY.CA Find many great new & used options and get the best deals for 4pcs Universal Carbon Fiber Car Heated Seat Heater Pads Kit High Low Temp Switch at the best online prices at eBay! Free shipping... I added it manually under the stock seat and re-stabled the leather cover again. I ran the wires from the side cover to the front and fixed the key next to my right hand. I installed a relay under the seat and I got the signal from the rear light wire so its enabled only with the IGN on .. 4 Link to comment Share on other sites More sharing options...
Nuckingfuts Posted April 11, 2019 Share Posted April 11, 2019 (edited) Found some black CNC machined levers with gold accents to match my forks. Simple but subtle bling. Edited April 11, 2019 by Nuckingfuts Wrong pic 2 1 Link to comment Share on other sites More sharing options...
Premium Member Trambo Posted April 11, 2019 Premium Member Share Posted April 11, 2019 After a long, long winter I finally managed to get mine out for a commute to work today. I'd nearly forgotten how magical the sound of that Black Widow carbon can was. Ahh, spring! 3 1 2015 Stealth Grey FJ-09 Pilot Base of Operations: Chesterfield, VA Farkels? Lots, nothing flashy, but all functional... Link to comment Share on other sites More sharing options...
Premium Member 3sum Posted April 11, 2019 Premium Member Share Posted April 11, 2019 I rode to work today, too. A little chilly in the morning but warmed to 80 today. Weather guessers are saying the same for tomorrow. Link to comment Share on other sites More sharing options...
nicksta43 Posted April 11, 2019 Share Posted April 11, 2019 Planned to finish up the valve adjustment and maybe get to the throttle body sync. However I decided to get strep instead so I'm sitting on the couch being miserable. Link to comment Share on other sites More sharing options...
duhs10 Posted April 11, 2019 Share Posted April 11, 2019 2 minutes ago, nicksta43 said: Planned to finish up the valve adjustment and maybe get to the throttle body sync. However I decided to get strep instead so I'm sitting on the couch being miserable. Damn dude... sorry to hear that. I'm about to put mine down for a few for throttle body sync and valve clearance check / adjustment. It's a little early in terms of miles but want to get it done before the prime riding weather really takes off. '15 FJ-09 w/ lots of extras... Fayetteville, GA, USA Link to comment Share on other sites More sharing options...
Premium Member micah2074 Posted April 11, 2019 Premium Member Share Posted April 11, 2019 Yesterday we did 400+ miles all in the mountains and on back roads. It was glorious. 4 1 Let’s go Brandon Link to comment Share on other sites More sharing options...
Nuckingfuts Posted April 11, 2019 Share Posted April 11, 2019 Put this cheap Chinese rad guard on, not bad and the price was right. https://www.amazon.com/gp/aw/d/B07JFNHPTB 2 Link to comment Share on other sites More sharing options...
nicksta43 Posted April 11, 2019 Share Posted April 11, 2019 After seven months, today I have a running motorcycle! Fixed the valve clearance, set the cam timing and synced the throttle bodies. A quick ten Mile test ride confirmed she's good to go. Super stoked! 7 2 Link to comment Share on other sites More sharing options...
Premium Member micah2074 Posted April 11, 2019 Premium Member Share Posted April 11, 2019 42 minutes ago, nicksta43 said: After seven months, today I have a running motorcycle! Fixed the valve clearance, set the cam timing and synced the throttle bodies. A quick ten Mile test ride confirmed she's good to go. Super stoked! Now, that's some good news! You got a lot of miles to burn so get to it. Let’s go Brandon Link to comment Share on other sites More sharing options...
FB4004 Posted April 12, 2019 Share Posted April 12, 2019 Installed Leo Vince stainless exhaust. Sound with the DB killer in is quite good. Maybe will take the db killer out just for fun. 3 2 Link to comment Share on other sites More sharing options...
Premium Member micah2074 Posted April 12, 2019 Premium Member Share Posted April 12, 2019 That's a nice lookin can. Let’s go Brandon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now