hscooter52 Posted February 23, 2016 Share Posted February 23, 2016 Do I have the seat on wrong or is it just that loose? The rest of the bike seems to have good fit and finish so it makes me think that something is wrong with the seat. I've tried it in both the low and high position. I've seen threads about the uncomfortableness of the seat but nothing on this topic. Link to comment Share on other sites More sharing options...
docsimple Posted February 23, 2016 Share Posted February 23, 2016 There are multiple seat settings so some of them are wiggly. I found that it sits better in the higher setting. 2015 Red FJ 09 2013 WR250R - little boy blue - sold 2012 DL650 V Strom - sold 2007 FZ6 - sold 1986 FJ600 - sold Link to comment Share on other sites More sharing options...
auraaura Posted February 23, 2016 Share Posted February 23, 2016 insert code here Mine jiggles around so much I've zip-tied the back of it down to the mounting bracket. It helps! The seat is definitely not one of the bike's strong points... Link to comment Share on other sites More sharing options...
goldfishlung Posted February 25, 2016 Share Posted February 25, 2016 Mine has a little bit of slack but nothing you notice while sitting on it. I find it to be pretty comfortable on long rides. Link to comment Share on other sites More sharing options...
kimmie Posted February 25, 2016 Share Posted February 25, 2016 Not to offend, but make sure the plastic insert is in the right position for the corresponding seat height. If you try to out the seat on and they aren't matched up right, the seat will wiggle about. Also make sure you have the seat tongue in the correct position for the corresponding height, again if not aligned correctly the seat will wiggle about. Kimmie......the lady who likes to take little detours Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.