noburo Posted May 12, 2016 Share Posted May 12, 2016 Hey all; I hope someone can help me with this. I recently bought a SHAD SH48 Top case. It contains a mounting plate as well. I have the Yamaha OEM Rack installed. I can't figure out how to correctly install the Shad mount plate onto the OEM rack, as the available holes do not line up. Does anybody have some tips on how to install this? Am I missing a piece? Thanks in advance! to clarify: It's this OEM Rack (2PPFRLUG0000): Link to comment Share on other sites More sharing options...
praztek Posted May 12, 2016 Share Posted May 12, 2016 Hope this helps http://fj-09.org/thread/1132/yamaha-rear-rack-shad-sh45?page=2 Link to comment Share on other sites More sharing options...
noburo Posted May 13, 2016 Author Share Posted May 13, 2016 Thanks for this info... I found the post already, but wasn't convinced it was similar. At least I now know it's possible with some custom work. I asked SHAD as well; and they said I needed another plate -> To mount to SH48 you will need to fix the shad top master: http://www.shad.es/es/shad-world/productos/fijaciones/yamaha/mt09-tracer/c12mar2mod642/ I'll try to work something out first Link to comment Share on other sites More sharing options...
praztek Posted May 13, 2016 Share Posted May 13, 2016 Thanks for this info... I found the post already, but wasn't convinced it was similar. At least I now know it's possible with some custom work. I asked SHAD as well; and they said I needed another plate -> To mount to SH48 you will need to fix the shad top master: http://www.shad.es/es/shad-world/productos/fijaciones/yamaha/mt09-tracer/c12mar2mod642/ I'll try to work something out first I have the shad48 mounted to yamaha oem rack , using the shad plate just by drilling out new holes to line up. Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.