Mntplz

On 10/16/2020 at 11:43 PM, Salish900 said:

Ok, I have the connectors above and have wired everything according to the excellent instructions here but nothing happens. I'm just doing a dry run before attaching the grips and all, connecting the white wires together and into the grey connector. My connector above only has two wires instead of three, so I mapped which side of the connector the black wire is on in the instructions above and see it is the right side if looking from where the wires enter the fitting. On my connectors, this wire is also solid black. So I connected both white wires and placed into the fitting linked to the grey bike fitting and combined all the red and blue and fitted into the bike fitting that is black. Nothing happens. 

Any insights would be greatly appreciated! 

Solved! It turns out these connectors I got used different colored wires for the same spot on the two connectors. Black wire on one is in the spot that the black and grey wire is on for the other. Figured that out and Walla! The menu works and the grips heated. I'm so darn happy. Thank you all and I think I can now button this up. 

This was my answer.  The connectors I got did not match up. Had to find where the wires were missing.  The black wires on my connectors, on the bike side,  those are empty slots. So I'm using the red wires instead of the black.  

I must be missing something.  The warmers are not triggering the grip screen on the dash.    Can someone spot my error? https://photos.app.goo.gl/uKQ77vADksj3ZGqSA