oldguy44
-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by oldguy44
-
-
Just take some fine steel wool and rub---- presto--- matte finish and no paint to rub off!
-
Easiest to just file off part of the plastic alignment pegs. That will hold the controls tightly and still let you adjust things where you want them after the bars are mounted.did you have to drill location holes into the Renthal for mounting the switch housings? I'm really interested in doing this swap
-
I had the same problem, so I backed it out enough to really hear it at 25-30 mph, then stopped and tightened about an eighth of a turn. After about 6 adjustments I think i'm about there. I also could't hear it at idle. Ride and tighten til it gets quiet.
-
Google Giles Tooling 2dgt-01 adjustable handlebar risers for MT-09. Mine cost me lbs191.99 from Europe with shipping.
-
Street Naked works the best, I also added European made Yamaha adjustable risers set all the way back and still kept stock wires, brake line, and clutch cable in place. Much more comfortable.
-
I got my SW Motec kickstand shoe from Revzilla, in stock at that time.
-
The outlet on the left side of the dash comes standard. The right side one is optional for around 39 dollars. The wiring harness is ready to take the outlet plug.
What did you do to your FJ-tracer-gt today?
in FJ-09 Tracer 900 General Discussions
Posted