kd7vdb

Oh ok. Those are slightly less, actually (without the rack. )
20ft lbs I believe.
 
S

I ended up tightening them to 30ft lbs yesterday so they should be good to go (added loctite too). I also had one of the button heads on the tank trim was a little loose. I tried to remove it and it went immediately to swiss cheese ;-| . I ordered 4 extras PN 90111-05007-00. Luckily my local dealer was able to order them with their regular order as it is a part number that has been used on motorcycles and boat motors for years. 

For which bags? The Yamaha removable "city" cases? 
Those mounting bolts torque to 25 ft lbs, if the rear luggage rack is installed.
 
Inside the tail, for the mounts for the luggage: m6 bolts 7.2 ft lbs, m8 bolt is 21 ft lbs, corresponding nut is 16 ft.
 
If yours are loose, you may want to call your dealer. I've heard there is a tech bulletin from Yamaha about excessive movement from the saddlebag mounts and how to tighten things up.
 
Skip

I was actually looking for the spec for the stock plastic slots that come on the bike without the rear rack. I am going to assume it is the same though I can't see a reason why it would be different. 

Does anyone have the torque value for the upper bag mounts on the side of the tail? My mounts can both wiggle around. Oh and the value for the bar-end bolts one of mine came out a cm or so in the first 100 miles.