-
Posts
188 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by magpie
-
-
a what now?5300 center worn right down replaced today with p33,
Sorry typo
Mitchiln pilot 3s
-
5300 center worn right down replaced today with p33,
-
I normally fill up at around 160 miles but have taken it to 220 before filling up
-
The ktm guards look much better than standard.. Do they offer more protection than standard guards
-
Great job they should see you comeing now
-
@motomachines - Got my clear Ermax Touring Screen in the mail today! AWESOME!!! It's beautiful! Fits perfectly, great design...I couldn't be happier. This is the screen that will stay on my bike. Yes, those are the LED lights installed on the hand guards. Love 'em.
Just fitted same screen looks great and works well much stiffer than standard screen
-
-
I keep a puncture repair kit that includes two small CO2 canisters in the space created
-
Cut away the black plastic side section with a craft knife this will give extra space
-
I have ordered a set from Taiwan, will report back on them if no one else has first.
Fitted last week they work great
-
that's correct no need to connect white wire ...but you can and it will dim the lights
Ah, so no need to connect the white wire which is used for "dimming"...?The relay is a simple two wire connection direct to the battery the relay automatically turns on the lamps when the engine is started and off when stopped
-
The relay is a simple two wire connection direct to the battery the relay automatically turns on the lamps when the engine is started and off when stoppedThose lights look great..! How are you using the "LED DAYTIME RUNNING LIGHT RELAY" with it...(unless you don't ofcoz.... ....)...?
-
-
PICS PICS pleasejust fitted these to the Tracer they are a quality item LED lamps
also use one of these LED DAYTIME RUNNING LIGHT RELAY
will post some pics ASAP
After my accident I'm seriously thinking of making my Tracer as visible as possible...I like the GSA 2014 LED lights - brightness and look. They aren't cheap, but I had them on loaner F800GSA and bike was visible from miles, which made its presence on the road significant. Just need to work out the mounting points for these. I have PDM 60 fitted last night, so powering them up is not a problem.
bolts on to the fender using the original bolts (can be fitted to any one of the two bolts)
its hard to show the brightness of the lamps but they are as bright as the main beam
-
-
The Matt finish paint on the grey tracers needs to be cleaned carefully
never use car polish / shampoo as they contain glossing agents
I use this link
-
just fitted these to the Tracer they are a quality item LED lamps
also use one of these LED DAYTIME RUNNING LIGHT RELAY
will post some pics ASAP
-
Spotted something on the UK versions of Ebay or Amazon that suits the MT09 Tracer, then post a link in this thread.
I'll start with this mirror extender I posted elsewhere in the forum
Perhaps the mods could make this a sticky thread
Have fitted these and they work well before I could not see past my shoulders
-
Today installed front fender extender.
Can you tell me what fender extender fits the tracer thanks
What did you do to your FJ-tracer-gt today?
in FJ-09 Tracer 900 General Discussions
Posted
Any information on the fitting of these heated grips would be appreciated