kezsir

On 4/27/2021 at 11:38 PM, togrilo said:

Hi kezsir, I used this 

Conectores de fiação sinal de volta da motocicleta, 4 unidades, adaptador de plugue para yamaha yzf r6 r1 r3 r6s fz6 fzs6 fz1 250 500 600|adapter plug|adapter 12vadapter yamaha - AliExpress

---

Compre Fácil, Viva Melhor! Aliexpress.com

I disassembled and removed the temperature selector leaving only the two wires that are fixed in the grip(resistance) and I 
screwed the cover back. This two wires from the resistance I welded each one on a wire from the connector. The right grip, I only welded the two wires on the wires from the connector. You need know that there are two factory connectors, one for each grip and each factory connector there are two wires one for each wire from the resistance. When the resistance is correctly connected on the factory connectors the heater grips menu will be able.

If I wasn't clear, please feel free to ask any question. 

 

Thanks for the information! I have written you privately with some questions so as not to enlarge the thread.

On 3/22/2021 at 2:06 PM, togrilo said:

Hey guys, just sharing information. I installed this heated grips using the factory wire and it works fine wit ECM menu. I removed the temperature selector and wired the ground and positive from each grip into the factory connectors.

Lmodri universal motocicleta 7/8 "22mm elétrico aquecido apertos scooter ciclomotor barra mão mais quente ajustável aperto quente 12v par|Exercit.| - AliExpress

---

Compre Fácil, Viva Melhor! Aliexpress.com

 

Hi Togrilo, I just have those same grips forgotten in a drawer for a couple of years and I want to try to use them like you, can you share the components you have used to connect them to the factory connectors? do you have any wiring diagram or video where you can see how you override the temperature selector?
Thanks in advance! ✌️