Matthew53

Hello, I have a problem with my tracker 900. I installed speed sensor from MT09 (the version that didn't have ABS used 3 pins speed sensor) because I bought this bike without ABS module and connector is also cutted, the speed sensors at wheels are missing too. I don't want to repair all of these, I don't care about ABS anyway, just want to get speed on display.

That's why I just put this sensor and accordingly to service manual I connected blue cable (+) and GND to the same wires as go to intake air pressure sensor and I took white/yellow cable that goes from engine ECU  to ABS module and connected it to sensor. On this white/yellow and GND there should be from 0.6V to 4.8V dependently of wheel rotation.

In my case it shows always 12V regardless of wheel rotation. It doesn't matter if sensor is connected or not. On display it doesn't read any speed, obviously.

Do you know why there is 12V instead of values mentioned above? I assume it has something to do that it was originally with ABS module and maybe then there is 12V that goes to ABS (cannot find any source to confirm it). 

Any help will be appreciated. 

23 hours ago, piotrek said:

Does this align with what you have?

It looks like an abbreviation I've been looking for. Thank you for that!

7 hours ago, dazzler24 said:

Don't know if your model/variant is the same as mine but FWIW....

Thank you, but your abbreviations are little different, e.g on my wiring diagram headlight control unit is 86. 

I think there are two versions of the same wiring - one with immobilizer and one without

12 hours ago, DaxTheDuke said:

So in chapter 8 of the manual, there should be multiple pages of difference electrical systems, the diagram for each and what the #'s refer to. Lmk if you find it!

Yes, I know about it, but it would be more convenient and faster to take a look at the colour diagram at last page and have description for all numbers at one place, as I have in other manuals. 

5 hours ago, skipperT said:

Page 543 (of 548) of my service manual shows the components and the corresponding number. 
wire colors are listed on the RH side of the page. 
 

-Skip
 

I've got only 540 pages in manual, so apparently these pages are missing. Could you please send me photo of this description? It would be really useful.

Hello, I have bought a service manual to FJ-09 2015-2016. I need it specially for wiring diagram on last page, but unfortunately there isn't description of wiring diagram numbers.
I wrote a message to seller, but he didn't reply.
I have other manuals and every each of them has description of numbers and colours, but here I have only diagram.
Does anyone maybe has a description for this specific manual? Thanks in advance.

Hello, I'm from Poland and bikes are my passion, so I decided to join the community of this forum.