Yaman

There is no weird noises from the clutch and it got smoother after i install fuel controller.  Consumpsion looks like the same in the computer . Forecast say it will snow again this week 

Last year when i was riding in 4th gear about 60-70 kmh it felt not smooth , like the chain was worn . I got a qoute for ECU flash with Dyno run for 650 $ , so I ordered rapid bike easy for 150 $ . Today i plugged it in and it was smoother , not wow smoother but noticable . New picture in the sun so the blue pop  , i also painted the cover by the headlight . 

 I carved out some foam in the seat and put in 2cm gel pad and some extra padding at the front , I just got home from a 2hour trip and it is better,  a bit on the firm side but i think its because the gel is cold . I have 2 sets of seats so i can swap to see what i like best. 

Today was first ride this season.  Bike was originally matt blue but i prefer gloss blue so i sprayed it this winter . I got a good deal on new seats for 50$ so i carved out some foam and put in a 2cm gel pad and some extra padding in front.  And the seats have blue stitching so im happy with that . I also did the lift mod on the driver seat . 

There is but you can move it several mm . Loosen ,align and tighten the bolt . It worked for me . I still have snow and ice in my driveway and the roads are full of gravel . I am jealous of you who can ride almost year round . 

The lever are from Ali express , it was 36 $ with shipping , I have big feet so i wanted a longer one , on my previous tracer 7 i cut and welded in a 2 cm piece , but on this bike its aluminium and i dont weld aluminium. The bolt in the blue circle need to be shorter. 

You may try too loosen the hex bolt behind the left footpeg and twist it , I used 3 extensions on my ratchet from brake side when i changed my gear lever . 

In 2018 Yamaha bought patent from a norwegian company called brudeli tech , it was patent of the front leaning suspension .  The company are located 10 min from my home so i drive by them often . 

Yesterday I washed the bike and changed oil and filter . It is still too much snow and ice so I rolled it back in my house after.

Nice work , I tweaked a few seats on my previous bikes but nothing like this . On my roadstar 1600 i made a completly new seat with a hand stitcher . And the feeling that you did it yourself is priceless. 

Have someone tried dynojet power vision 3 , I want to tune my bike but it is stupid expensive here in norway . 

Bolt on stuff is not always bolt on , the linkage did touch the foot peg bracket so had too cut some of the spacer, cirkeled in photo.  But that is the fun about making your motorcycle yours 

I put new gear shifter on , 2 cm longer than oem. 

I have a 2019 900 gt . The shifter is bent inwards, i tried to bend  it back but its crap cast aluminium and i was afraid it would snap so i ordered a new,  2 cm longer . 

They are givi knockoffs.  44$ on aliexpress . 

You can find everything on Aliexpress,  they cost 5,33 $ , I had to customize from t10 to ba15s . Here in Norway we have hefty fines if you use phone while driving so the cagers isnt so distracted. 

Yesterday i got 110 km in Sunny but Cold weather , 10° c . Tested touring windscreen and handguard extension , the windscreen will be chopped .

I replaced mine with oem tracer 700 footpegs 

Yesterday i put on handguard extension , they work , put airflow over the hands , also put on tail tidy with euro pumpkins with red and amber led bulb so now i have 3 brakelights. 

The weather was so nice today so just had to go for a ride . 20° c . 

Took a ride in the forest on gravel roads to test new tires . Bridgestone ax41s.  They work really well. 

The bracket is ziptied to the frame so its not moving , i dont know how the older ones are but on this you remove the rubber and vent and fill with squeeze bottle,  the vent is above the bodywork on the bike . I set it to drip 1 drop pr 90 sec. Now its Rain and only 12° c so hopefully i can go for a ride and test the tires tomorrow.  

So, yesterday i route the hose for scottoiler . I hide it on the inside of the swingarm. Today the glue was dry so i could do the rest. 

The reservoir i put under the seat . Easy to fill up and adjust . Will go for a ride and test later today