Nik.munich

1 hour ago, skipperT said:

What are your tire pressures set to?

-Skip

Hi, 

The tire pressures were set to 2.5 Front and 2.9 rear. 

Checked yesterday.

-Nik

14 hours ago, nhchris said:

Hummm,

A couple of things related to wheel mis-alignment.  Not sure any of the following would help, but...

The wheels are both aligned perfectly. 

Have you moved the fork legs up or down in the triple clamps? If so are they set to different values?

Is fork spring tension set the same on each fork leg?  See owners manual for adjustment procedure.

I haven't tried to anything with the front fork yet, but have observed that the rebound is quite high. Could that be a cause? The only change I made was at the rear, and i increased the preload on it as i am a slightly heavy guy and observed the rear was too soft. 

Is front wheel aligned in the forks?  Loosen front wheel  pinch and axel bolts, pump forks up and downs to align them, tighten front wheel.

I shall try this out soon and test it.! 

Is rear wheel aligned correctly in swing arm? Check w chain alignment tool.

Yes, i did that the last time i adjusted the chain slack, with an alignment tool. 

 

14 hours ago, nhchris said:

Hope this helps

The tire looks fine. I don't see any uneven wear or any kind of spots/bulges. Looks pretty new actually as it's been ridden soft and only on good roads. The Wobble is slightly more violent when surface is wet but also quite noticed on dry Asphalt. Which is kind of concerning. 

Hello all, 

Thank you for letting me join the forum.!

I have a Tracer 900 2018 in tech black.

I have 5500 km on the clock now and have been doing just city rides so far.

I have a new issue cropping up recently. When I lean into a corner, even at low speeds, I feel an instability on the front wheel and the bike shakes in the front.

I checked the fork bearing and it all seems good. No clue what is going on. Has anyone had this issue?

Looking for your feedbacks.

Thanks in advance.
Nikhil