SC3896
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by SC3896
-
-
Thank you for your replies. I have now been able to correct the cable adjustment myself.
I think I must have had brain fade when I started this topic as the answer to getting access to the clutch cable top nut at the engine end, was very easily solved by fully loosening off the cable at the clutch lever and then pushing the cable sheath out of the engine end bracket, which allowed fully and easy access to the top adjusting nut.
A simple task made impossibly confusing by my brain fade. 🤪
- 1
- 1
-
Will do tomorrow.
-
I have only travelled 660 miles but my clutch lever is at its max adjustment.
I can't adjust the cable st the engine end as the top adustment nut is at the top of the adjustment limit on the cable sheath and hidden inside the bracket between the top nut and the lock nut shop I can't hey to the top nut.
Does anyone have any ideas as to how i can get at the top nut ?
I've tried pushing up the cable sheath but it doesn't move at all.
Thanks in advance.
-
On 5/25/2019 at 6:58 PM, Mojmir said:
I have Michelin Pilot5. Very good tire especially on slippery (wet) roads
I also have the Michelin Road5's on my GT and they are excellent. I highly recommend them.
- 2
-
3 hours ago, SC3896 said:
There seems to be some confusion about what I am asking. I wish to be pointed in the right direction as to where I can get a socket that will fit in to the circular gap and loosen the mounting bolt head.
-
-
18 minutes ago, mawbkk said:
I just fitted the Yamaha rear rack, apparently the max load is 5KG?
Yes that is what the rack states.
-
On 10/27/2018 at 2:09 PM, gv550 said:
I have the Yamaha 50L top case and it mounts directly to the Yamaha luggage rack. No adaptor needed.
Is the 50L top box waterproof ?
Thanks
-
8 minutes ago, Merse2 said:
Hi there,
I am not sure if this will work but I will try to post links to some photos ...
20190604_180129_zpsai2am3pj.jpg Photo by andyrendall | Photobucket
Explore andyrendall's photos on Photobucket.20190604_180228_zpsvck91pfa.jpg Photo by andyrendall | Photobucket
Explore andyrendall's photos on Photobucket.20190604_180219_zpskahnjm6d.jpg Photo by andyrendall | Photobucket
Explore andyrendall's photos on Photobucket.20190604_180148_zpsbrk6o55b.jpg Photo by andyrendall | Photobucket
Explore andyrendall's photos on Photobucket.Thank you so much for these photos, they are going to help me hugely.
-
3 hours ago, Merse2 said:
I fitted mine under the rear seat.
Hi. How did you route the oil pipe to the rear sprocket ?
I've spent about 3 hours trying all the routes I can think and none of them seem to be truly safe/protective for the oil pipe. If possible could you upload photos of the oil pipe route. I apologise if this is putting you out but my brain is totally scrambled after trying to find the best route.
Thanks.
-
18 hours ago, quetech said:
I fitted one in the small space on the left hand side between the frame and the side panel.
Fits and works a treat, I put a wee fit of foam under it to increase the angle.
Mike
Great, thanks for this reply.
Hi. How did you route the oil pipe to the rear sprocket ?
I've spent about 3 hours trying all the routes I can think and none of them seem to be truly safe/protective for the oil pipe. If possible could you upload photos of the oil pipe route. I apologise if this is putting you out but my brain is totally scrambled after trying to find the best route.
Thanks.
-
Has anyone fitted a Scottoiler xSystem to a 900GT ?
If so, where have you sited the reservoir ?
Innovv K2 Dash Cameras
in Tracer 900 GT Discussions
Posted · Edited by SC3896
Missed out info from a question
Has anyone fitted the Innovv K2 dual camera system on a Tracer 900GT ?
If so, did you have any mounting/installation problems ?
What camera mounting points did you use ?
Thanks