Patch Kit

Yes! Check this post for more info:

(Click “patch kit replied to a topic” to go right to it)

com3, did you ever figure this out? Mine has a similar issue, I believe, at 14k miles. About to check the plugs, sync TBs, check O2 sensor, and all lines.

If anyone's still on the fence about this, it's time to hop down and get this done.

I use my 2015 FJ for commuting in Seattle (so high-end performance is irrelevant to me), with occasional weekend rides. I just stopped in their shop and had them flash my ecu, and it worked wonders. 

The low speed/low rpm jerkiness is gone. The hesitation at 2,500 rpm in first and second gear is gone. The effect is immediate. If you notice current jerkiness when riding in the city, you will notice immediately the difference.

"But, is it really worth it?? Do I really need to do this?" Yes. It is. You do.

My wife is struggling to find riding pants that fit well. She doesn't ride on her own, but as my passenger on long day trips and overnights. 

Any ladies on here have advice? Or, any guys with ladies who went through a similar struggle already?

All the pants we've tried so far seem to have been designed by men (not surprising) and have no accommodation for hips!

It’s really a holdover from dirt bikes. No real function on a road bike. Just “weird” style. Which I totally support.

I installed my new Yamaha 39L top case today. When I say "installed", I mean I flipped a lever up, dropped it on, and flipped the lever down...

Unfortunately, the re-keyable lock kit is out of stock with Yamaha right now, and no one has it in stock. I guess the case will sit on the shelf for a few weeks!

My ‘15 FJ is named Cheri. “Cherry Cheri”.

My CB500X was Freddie.

My XT250 was Pacman (pacman decals all over it)

I never did name my two ‘79 KZ650SR’s. Not sure why.

Today, I installed a BackOff brake light modulator, and some small additional red LED lights on the brake circuit.

I also installed some axle sliders, just in case. R&G engine guards sometime in the future...

I installed a rear rack designed for the 2019 Tracer on my 2015 FJ. In case anyone was wondering, it works! Only minor modification to the plastics as shown below. First pic shows the difference between the shape of the 2015 FJ passenger hold and the rear rack for the 2019 Tracer. This is the mount that is under the passenger seat. The second pic shows the cutout of the side plastic that needs to be made to accommodate the rear rack. The plastic is soft enough to cut with a sharp razor. Looks good!

2 hours ago, betoney said:

I don't understand it on actual true 'adventure' bikes let alone a non-adventure bike.  But to those that have them, I will kindly say that it looks fine... on YOUR bike.😎

Other things that don’t make sense, but are true:

parking in driveways, driving in parkways.

Cars and trucks transport shipments. Ships transport cargo.

“Fat chance” and “slim chance” mean the same thing.

“Hot as hell” vs “cold as hell”. Hell seems confused.

Rubber duckies are yellow. Who’s seen a yellow duck?

2 hours ago, bowlin01 said:

@BBB nice custom paint job!!

Can we get a vinyl wrap in that, please?

Beak'd!

Sorry Anti-Beak'ers, but I joined the Pro-Beak Club and I'm totally digging it!

I have a Tutoro that was on my CB500X for 20,000+ miles. Worked great. I haven't mounted it on my FJ yet.

Today I installed my Denali Micro LED lights and a USB for my phone/gps. Pictures attached, as I know we all love pics!

For those who have been nervous about using the accessory plugs behind the windscreen for lights/chargers/heated grips, etc, let me tell you, it's very easy. Some of the posts on here regarding using these ports refer to the "dummy" connector that is snapped in to these accessory ports. These should be thought of less as "dummy" connectors, and more as empty connectors. All they need to become fully-functioning is the male terminals available at cycleterminal.com. See pic below. Crimp these on the end of your wire along with one of the rubber boots, and these snap right in to the empty connector attached to the accessory port connector behind the windscreen.

Luckily, I had some leftovers of these terminals from this same LED install on my previous bike, a Honda.

As for mounting the lights themselves, I'm a big fan of the K.I.S.S. principle, and I simply remove a fender bolt, grab a longer bolt and some spacers (white plastic in the picture), and attach the light right next to the fender. These were mounted in this way on my previous bike for over 20,000 miles. Worked great. I think it also gives it an almost OE look. I could probably improve on that more by using a single, wider black spacer in place of the two white ones. But, meh.

Cool. I’m 5’7”, so I might squeak by under that buffeting with a larger screen. 

I bought this bike on Monday, and after a 12k service, I finally got to tinker with it. Today I installed a louder horn, side racks for my Givi cases, a triboseat gripper for my wife on the passenger seat, and my garage door opener. 
I also reduced the rebound on the suspension, changed the lever and switch positioning, and planned the routing for my Denali auxiliary lights. 
Starting to feel like my bike!

48 minutes ago, Scooter426 said:

I have the smaller Powerbronze screen from the UK.  So far, I like it best. No buffeting.  The larger one is a Parabellum 26" I believe.  Great to get behind in winter time but I get moved around a lot on the freeway with traffic.  Buffeting with the bigger screen is definitely an issue.  It is nice to get out of the wind tho on rides where I am away from traffic.  

Right now I am running it with no handguards and the mini Powerbronze screen (last pic). Seems to be more sporty and flickable. No wind protection at all tho.

 

Here is a link for the powerbronze windscreen:

YAMAHA ,MT-09 TRACER, 15-17 ,FJ-09 TRACER, 15-17 (330 MM) 460-Y103

---

...

 

 

 

Scooter, how tall are you?

Right on, thanks Scooter!

What screens do you have? And what thoughts do you have on each?

Yep, that's the one Willie!

5 minutes ago, daboo said:

I live in the north end, if you are looking for someone to ride with.

Chris

Sounds good. I'll let you know next time I'm heading out with a couple of my rider friends and see if you're available. We usually head south to Gig Harbor area or east to Carnation, etc. Other nice routes are always welcome!

46 minutes ago, kingfisher said:

It might, the basic bolt holes line up the same. Don’t know about the bodywork though.

I'll give it a shot, and report back!

35 minutes ago, betoney said:

@Patch Kit - Welcome.  Great bike with a lot of potential to adapt to however you want to use it, sporty, commuting, long distance etc.

Right from the start, get a radiator guard and loosen the chain to about 30mm slack.  The rest will come in time.

If you have questions or need advise on spending your money on upgrades, we are here to help.😎

Sweet, thanks.

Olympia, eh? I have a couple BMW rider friends in Gig Harbor who I head down there to ride with sometimes. Great roads down there.

King, do you think they would be reverse compatible?

I have a 2015 and would like to put the rear rack for the 2019 Tracer on it. It looks real close to fitting...

Yamaha Rear Rack / Top Case Mount Tracer 900 / GT 2019-2020 | 15% ($30.00) Off!

---

The Tracer 900 Rear Rack provides a stable platform that supports select...