Mirror_Image

That's odd, can someone measure in the tip of passenger peg? Is a taller point, maine I can spot a difference there

hi @skipperT bike was on ground, and a buddy just holding to keep it leveled while I was tooking measurements

On 4/20/2021 at 10:03 PM, skipperT said:

I wouldn’t use the seat. 
take both seats off or use something else that one of us could then duplicate (as a comparison measurement) so that you would then have some reliable data. 

Honestly the easiest way to see if the ride heights been increased by the shock (likely) is to remove it and measure from from the center of each eyelet. That will tell you everything. 

IMHO you have 2 different things going on: first, the shock and secondly, a worn out kickstand. 

-Skip

I took seat off and i took some measuremenets, the scale is in centimeters, but converted is like;

From ground to bolt - 73 centimeters = 28.7401575 inches

From Ground to passager foot peg - 49 centimeters = 19.2913386 inches

From ground to tip os passanger handle - 91 centimeters = 35.8267717 inches

I also noticed that front forks are all the way to the top. 

The bike really leans A LOT in kickstand, kickstand and center stand are not worn.

Can any of you guys take same measuremente on your tracers? Thank you in advance 

Can you guys inform in what part of the seat should I measure from the ground to understand if the bike is sitting higher than it should?  

I have a 2017 Tracer 900 that previous owner changed the rear shock for a Kawa ZX6R  i belive

Bike handles great, but problem is that she leans too far on kickstand, and on center stand the back wheel is touching grouns, and i cannot spinf it for mantainance

Is this due to shock sawp correct? But is it normal!?

Any way that i can make it stand normal?

On 2/17/2021 at 6:22 PM, BBB said:

Welcome @Mirror_Image. Looking forward to reading about your mods.

I opened a new topic with all the mods listed

Thanks to all 

Hi Guys, only to share my mod list,

I recentely purshased and pe-owned 2017 Tracer 900, many of these mods were made by previous owner

- Yamaha OEM Quickshift
- Yamaha OEM heated grips
- Yamaha OEM Led Blinkers 
- Ohlins Springs on front forks
- Swap of back suspension with Kawasaki ZXR6 Showa
- Ohlins Steering Damper
- SW Motech Kobra Handguards
- Ermax Sport light smoke windshield
- Puig 3.0 Aluminum Levers
- Super Teneré Rubber Footpegs
- Cosmo Radiator protector
- Givi Crashbars
- Givi M8B Base + Givi Trekker TRK52 Topcase 
- Custom confort seats by JN Seatcover
- Mobile phone holder
- SW Motech bar raisers (+2,5,cm) (Removed)
- SW Motech Side Stand Plate
- Puig Racevalves
- Tail Tidy

Honestely, there are not much more to do, if some of you want some informations or pictures in detail let me know

https://www.instagram.com/testudinesontheroad/