Borisboyce

Thanks for your reply & advice. I will wire in via a relay to play it safe. Boris

Just to update my last posting. Dealer sent me new disc & pads fitted them & the brakes are now fine. Just hope it stays that way

Hi All I am in the process of fitting 2 x 20watt flood lights to my trader 900gt 2020. I intend to have them on all the time when the ignition is switched only ( using them as DRL's). I was going to wire them via a relay that was supplied with the kit but to save alot of work runing cables can I just wire in straight from the light fittings directly into the auxiliary plug behind the screen?. The lights have a combined current rating of 3.3 amps. (This is based on 2 x 20 watts = 40watts ÷ 12 volts = 3.3amps). My question is can the circuit supplying the grey aux plug behind the screen adequate for this current rating? Any help or advice would be greatly appreciated

I picked up my bike last saturday (collected in my van) took it out for the first ride today & have exactly the problem with the pulsating effect when applying the front brake at low speed when coming to a stop. Real shame because everything else about the bike was fantastic. Surprised though that the bike had just been serviced by the shop & thought they would have picked this fault up on a test ride after the service. Will be contacting the shop in morning to see what they are going to do about it as it is still in its 2 year yamaha warranty period. Registered nov 2020.