Guys, I did not install universal heated grips? They were the Yamaha specific items for the FJ-09. Attached are the pictures of the original LH grip, original throttle tube with original grip and housing and the longer tube that came on the RH side heated grip. I installed the heated throttle side as a dry run in the original throttle housing so the grip and cable were fully exposed, removed the heated grip as mentioned and marked where the cable was in relation to the housing. Next I installed the G2 in the old housing and slid the heated grip in place, noting the cable orientation and distance from original housing. Next was a complete installation with all the heated parts on the G2 as a complete assembly. Pictures of the assembled unit show it is the correct parts for the factory heated grips. Spare parts show what is left over after assembly.