Biccys

Echo what the above sentiments are. Early bikes have been renowned for the the high bar vibrations, but the newer ones (2020 onwards) have apparently had this addressed. Plus these will have the exceptional electronics including the TFT which is *phenomenal*. It's all about the motor against the electronics for me. I'm looking at the RS in future, not the XR. Boxer twin and all the TFT embellishments. Dunno if I can drag myself away from the CP3 though! It's SUCH a good lump!

I didn't bother with it in the end. I got a twin USB port with the Yammie connector already fitted from Ebay. https://www.ebay.co.uk/itm/Yamaha-60cm-usb-kit-18awg-mt07-mt09-tracer-mt10-fj-fz07-r1-r3-r6-xtz-yzf-ze-/174540117279?_trksid=p2349624.m46890.l49292 Now I'll caveat this with the requirement to adjust the hole a bit to get it to fit in the existing hole. Circular file would be fine. Apart from that, the USB is NOT activated just by the ignition, it's got a touch to start switch on there as well, so a couple of times I have forgotten and the phone hasn't been charging. If you remember though it's perfect and I'm glad I found it!

Funnily enough, I just fitted my used (off my 2015 Triumph Tiger sport 1050) Denali Soundbomb mini onto my 2019 Tracer gt900. Took almost 4 minutes. Would have been slightly less if I'd known the mounting bolts were 10mm and not what I thought were 12's..... It's definitely plug and play, turned on my ignition, quick blip of the horn button and the familiar breathy honk greeted me! Well worth the upgrade even if it's not massively louder, it is definitely a different tone that gets the attention of, well, everyone!

I should keep looking as I keep finding it cheaper every time I do!!! Ultimateaddons Dual USB Charger - Handlebar Mount - SPORTSBIKESHOP ...

Hi everyone, noob here, just got the bike this saturday and enjoyed the ride home in the peeing rain and dark and mud of the M1! I'm looking at doing this as my first mod, adding a USB socket to the right hand side of the fairing too, some really useful info regarding the spare sockets under the screen here! Dis anyone ever use the Yamaha twin USB sockets? https://parts.streetbike.co.uk/product/usb-dc-outlet/ Part ID is YME-FUSBU-00-00 These seem to be the right connector no? Would be a case of plug n play right?! I am wondering if the hole would still need modding to fit it in though? Any thoughts? Although Amazon look to have the exact same thing without the connector here. https://www.amazon.co.uk/OXFORD-EL102-Motorcycle-Dual-Socket/dp/B00M81W01Q/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=usb-charger07-21&linkId=10ec16e07c860518486285afd177c8c1&language=en_GB