longboy Posted June 17, 2016 Share Posted June 17, 2016 The long hard slide ;-| into the fuel tank can be relieved some by adding a couple of 3/8 inch spacers on the seat height tray. With the tray in the low setting grommets a couple of spacers up front and the seat tab in the upper slot parallels the seat more to the ground for more comfort. A stack of washers can be epoxied together for you non-machinists and placed. Link to comment Share on other sites More sharing options...
Buggy Nate Posted June 18, 2016 Share Posted June 18, 2016 Nice! Link to comment Share on other sites More sharing options...
BentAero Posted June 18, 2016 Share Posted June 18, 2016 I did the same thing to the seat on my FJR a few years ago, just but quite as fancy. I used a block of wood with some heavy 3m double-sided tape to hold it in place. Keep Asheville weird! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.