SC3896 Posted June 3, 2019 Share Posted June 3, 2019 Has anyone fitted a Scottoiler xSystem to a 900GT ? If so, where have you sited the reservoir ? Link to comment Share on other sites More sharing options...
quetech Posted June 3, 2019 Share Posted June 3, 2019 I fitted one in the small space on the left hand side between the frame and the side panel. Fits and works a treat, I put a wee fit of foam under it to increase the angle. Mike Link to comment Share on other sites More sharing options...
SC3896 Posted June 3, 2019 Author Share Posted June 3, 2019 (edited) 18 hours ago, quetech said: I fitted one in the small space on the left hand side between the frame and the side panel. Fits and works a treat, I put a wee fit of foam under it to increase the angle. Mike Great, thanks for this reply. Hi. How did you route the oil pipe to the rear sprocket ? I've spent about 3 hours trying all the routes I can think and none of them seem to be truly safe/protective for the oil pipe. If possible could you upload photos of the oil pipe route. I apologise if this is putting you out but my brain is totally scrambled after trying to find the best route. Thanks. Edited June 4, 2019 by SC3896 Extra question added. Link to comment Share on other sites More sharing options...
Merse2 Posted June 4, 2019 Share Posted June 4, 2019 I fitted mine under the rear seat. Link to comment Share on other sites More sharing options...
SC3896 Posted June 4, 2019 Author Share Posted June 4, 2019 3 hours ago, Merse2 said: I fitted mine under the rear seat. Hi. How did you route the oil pipe to the rear sprocket ? I've spent about 3 hours trying all the routes I can think and none of them seem to be truly safe/protective for the oil pipe. If possible could you upload photos of the oil pipe route. I apologise if this is putting you out but my brain is totally scrambled after trying to find the best route. Thanks. Link to comment Share on other sites More sharing options...
Merse2 Posted June 4, 2019 Share Posted June 4, 2019 Hi there, I am not sure if this will work but I will try to post links to some photos ... 20190604_180129_zpsai2am3pj.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180228_zpsvck91pfa.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180219_zpskahnjm6d.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180148_zpsbrk6o55b.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. Link to comment Share on other sites More sharing options...
SC3896 Posted June 4, 2019 Author Share Posted June 4, 2019 8 minutes ago, Merse2 said: Hi there, I am not sure if this will work but I will try to post links to some photos ... 20190604_180129_zpsai2am3pj.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180228_zpsvck91pfa.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180219_zpskahnjm6d.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. 20190604_180148_zpsbrk6o55b.jpg Photo by andyrendall | Photobucket Explore andyrendall's photos on Photobucket. Thank you so much for these photos, they are going to help me hugely. Link to comment Share on other sites More sharing options...
Merse2 Posted June 4, 2019 Share Posted June 4, 2019 It is a pleasure. The only cut I had to make was a groove in the underseat tray for the oil pipe. 1500 miles so far and all is well. Link to comment Share on other sites More sharing options...
quetech Posted June 4, 2019 Share Posted June 4, 2019 Sat Nav tracer 900 GT - Google Photos 9 new photos added to shared album If you have a look at the photo in this link and look closely you can see the feed tube behind the gear linkage and quickshifter sensor. fitting the reservoir in the space between the frame and the side panel meant I did not have to cut any parts away and left me with more space in the rear for other stuff like compressor and puncture repair kit. Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now