Jump to content

Throttle Lock


Recommended Posts

I did a search and did not see anything in the area of a throttle lock solution.  Has anybody had any success with a throttle lock?  I like the Break Away product, but it does specify a FJ-09 specific model, I would assume the FZ would be fine to use, but it is not compatible with heated grips.  Any suggestions would greatly be appreciated. 
 
Link to comment
Share on other sites

  • Premium Member
there is a thread http://fj-09.org/thread/668/throttle-lock with a recommendation from me
 
Hint re searching: ignore that box at the top right of the thread - anything put in there is only searched for in the open thread
 
Click the search link at the top centre that takes you to http://fj-09.org/search as this does a global search of the forum and has a load or parameters you can fiddle with - I did request some sort of clarification by the Admins but nothing came of it. Just getting rid of that search box on the top right would be the simplest solution.
This signature is left blank as the poster writes enough pretentious bollocks as it is.
Link to comment
Share on other sites

  • Premium Member
Go Cruise makes a throttle lock for 7/8" bar that sits on the handgrip rubber and locks against the brake lever. You can find it on Ebay or Amazon. One note - it doesn't work on top of a Grip Puppy, but it will work beside one, if you leave room on the regular throttle rubber. It's around $20 or so.
Don't follow. Don't lead. Don't join.
Link to comment
Share on other sites

Guest lawrenceofsuburbia
Go Cruise makes a throttle lock for 7/8" bar that sits on the handgrip rubber and locks against the brake lever. You can find it on Ebay or Amazon. One note - it doesn't work on top of a Grip Puppy, but it will work beside one, if you leave room on the regular throttle rubber. It's around $20 or so.
I have one. It works effectively and very easily. L of S
 
Link to comment
Share on other sites

  • 9 months later...
  • Premium Member
I just bought a Breakaway Cruise Control - Throttle Lock. It's a bit more custom then the Go Cruise... I will keep you posted when it arrives and I have it installed. Check them out... http://www.brakeawayproducts.com/store/index.php?route=product/product&product_id=59
 
The part number is currently not on the web, but you can phone order it as... 7CP05. They cost $179.00US. The only down fall so far I see is that then don't come in Black Anodize. Bummer!!!
 
I will keep you posted!
Link to comment
Share on other sites

Go Cruise makes a throttle lock for 7/8" bar that sits on the handgrip rubber and locks against the brake lever. You can find it on Ebay or Amazon. One note - it doesn't work on top of a Grip Puppy, but it will work beside one, if you leave room on the regular throttle rubber. It's around $20 or so.
https://thingiverse-production-new.s3.amazonaws.com/renders/ea/c7/25/9f/f6/RAD_6132_preview_featured.jpg
 
I have one, and it works really well. It holds the throttle well enough to be able to stretch your hand, but it's loose enough that you can still twist the throttle forward when you want. It works well enough to make me think twice about getting a $350 cruise control system. 
Link to comment
Share on other sites

  • Premium Member
I use the Kaota throttle lock. It works well with the hand guards. It takes a bit of finess to set it underway, you need just the right amount of tension. A little practice and you are good to go. I have hand pain, and this device gives my right hand the relief it needs.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×