dundee Posted April 21, 2018 Share Posted April 21, 2018 Hi all. I removed my gas tank for changing of the air filter & plugs. Just want to be sure the gas tank coupler (at the fuel pump) is on all the way. If someone could post a photo you may have or instructions it would be appreciated. Thank you! Link to comment Share on other sites More sharing options...
skipperT Posted April 21, 2018 Share Posted April 21, 2018 After you push the fitting of the line on the fuel pump, and close the clip - cycle the key (with the run switch on and pump plugged in). The pump runs for 4 seconds key on. Watch your eyes if you’re worried about the connection. If no leaks are seen, good to go. I don’t have a pic handy sorry. A very light coating of oil helps the seal inside the fuel line, slide easily onto the pump connection. -Skip. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.