ledruide

US and Canadian site, the US site list '23 models this morning. I can't believe also, I hope it's an error !

After looking Yamaha website , looks like the Tracer will be not available in US and Canada ? No Tracer in the 2023 lineup !

Thanks Steve ,good job, very helpful !

Vic, the lower locknut, swingarm side, has left-hand threads and the rod length, center to center, is 114 to 116 mm. hope this helps

you're right about Lust instructions, there's no mention about the suspension calibration and it should be .

Here is what the shop manual say about the rear suspension calibration , it's clearly stated : if failed is displayed reinstall .

That's big bu****it, suspension calibration is well described in owner's manual so it's not for dealers only , and I don't think failed simply meant nothing to calibrate, that's a stupid answer .Maybe a call to Lust Racing will helps you with this calibration problem .

OK, let we know what was the problem !

Yes that's what I'm talking, the bracket also is positioned correctly , may be remove the bracket nut on the swing arm and check if the sensor arm move easily, put the nut back and try a calibration. Do you know if the dealer did a calibration with succes after the lowering kit installation ?

The arm seem positioned correctly, so this not the problem, there is a rod between the arm and the swingarm, is the lower rod bracket tab is against the projection in the swingarm?

ok, can you take a photo of the angular position sensor arm, this is the sensor near the rear shock just above the chain on the left side of the bike .

Lowering kit is not the problem, I have installed the same kit on my T9 and the calibration was "succes" , did you put the bike on the center stand before the calibration?

Thanks a lot for the references KellyL !

Hi, Is somebody know the spring rate and free length of the rear shock spring on a Tracer 9 2021 GT ? Thanks

Wintersdark Thank you very much for the information, I have a NoMar tire change bar also, I'm happy that you can compare between the two tools and found easier the Bulter head, I'm seriously thinking about buying one ! Thanks.

Wintersdark, Thanks for link, did you place the order directly from the company or via Ebay? This tire changer seem to be well made. Thanks

Thanks for the detailed photos and text, very well made, good idea about the stand, I have the same sliders so I will do that !

Something like your first suggestion? He ask for solutions proven and tested by others here , since I didn't do anything related to lowering on my bike I don't suggest things to do, that's it!

I can't wait to see the answers the next time you ask for help on this forum !

I'm sure he must have considered this option before asking the question !