MartyP
Member-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by MartyP
-
My dealer could not get the rox risers to fit.
-
Heli makes a nice set
-
Hi All, I want to sell my sargent seat rider and passenger. These are made from the OEM pans so they fit perfect. The seat does not work for me but it may for you. Looking to let them go a fairly good price, DM me if you are interested.
-
Running,starting engine on centre stand
MartyP replied to Clicknow's topic in Tracer 900 GT Discussions
OK I ran this again. What I see is that when I put the bike in first gear and let go of the clutch the bike stays at 7 mph. I spray my chain lube on and move on. No error code and I do not touch the throttle. I hope this helps. -
Helibars riser now available for the Tracer GT
MartyP replied to magnatic's topic in Tracer 900 GT Discussions
Had it installed this weekend and I love it. So much more relaxed ride and way easier to work the key. Highly recommend and they look great. -
Running,starting engine on centre stand
MartyP replied to Clicknow's topic in Tracer 900 GT Discussions
Idle and 1st gear and a little revving. -
Official All encompassing Flasher LED thread!?
MartyP replied to open1mind's topic in Tracer 900 GT Discussions
-
I paid that price in August 2018 for my 2019 GT. I think you can get it cheaper.
-
Running,starting engine on centre stand
MartyP replied to Clicknow's topic in Tracer 900 GT Discussions
I have run my 2019 GT many times on the center stand to lube my chain. Never got a fault code but you know the next time I do it it will go on. -
Helibars riser now available for the Tracer GT
MartyP replied to magnatic's topic in Tracer 900 GT Discussions
Just ordered mine ✌️ -
With the puig trail pegs I have to raise both the clutch shifter and rear brake.
-
I just had these installed this weekend. They look nice but the buzz at high rpm's is present. I will say that stock I felt the buzz around 5K rpms with these its about at 8K.
-
Thanks
-
Hi All, I can't find this on the manual but I just got new foot pegs installed ( Puig Trail ) and I need to adjust my clutch and rear brake shift positions. I think I can figure out the clutch but the rear brake is a bit odd to me. Any help would be great. I need to raise the shifter and lower the rear brake. Thanks
-
Rox Risers don't fit the GT
-
My battery stays at 12.5 even when my charger is on. I did the test and when I started the bike the volts went to 14.1-14.2.
-
I meant the battery pack that I plug my tender into it only lasts a day. Looking at a battery generator but they are $$. I do have a volt meter and my alarm has one as well. currently it show 12.5
-
I live in an apartment and have no outlets to plug the bike in. I have to use a battery pack and only lasts a day.
-
What's the ideal RPM's and gear for optimal charging of the battery. I do a short commute to work 6 miles 30 minutes and I am having issues with my battery holding charge. My scorpio reads 12.5 most of the time and occasionally it will got to 14.1 if I do a longer ride. Thanks
-
I went with the denali D2 trioptic led. Now should I do one spot and one flood? I am looking for more visibility and more attention from the cage drivers.I am mounting them on my crash bars.
-
Hi All, 'Has anyone installed lights on their sw-motech crash bars? If not can anyone recommend a set to me? Thanks
-
Can you just drop the Yausa in or do you have to flip it around to match the terminals?
-
I have them but I have not installed them yet. They look very good and good quality as well. I did have to order two yamaha parts for them, both under $2 each.
-
Hi, does anyone know if the CRG Rc2 clutch lever for the MT-09 will fit the Tracer 900 GT?
-
Has anyone replaced the OEM battery? If so which one? Thanks