2and3cylinders

What size screw did you use?

Finally doin it! Will report back...

I normally take a 45 in TCX and A*, though they're non too big. How do your Daytonas run? Thanks

Good cranking is always nice. Replace the Schrader valve insert; try some some silicone grease on it during install. Yes, you are in trouble. Men were born to be in trouble by women...

2nd your fastest red T9 looks great and good luck with that type of charging on a bike. Does it get hot in direct sun, and does vibration reduce power transfer? One other thing I noticed in your photos, your garage is WAY, WAY TOO NEAT, CLEAN, ORGANIZED AND UNCLUTTERED!!! I've had the following notice over my desk since 1977 "A NEAT DESK IS A SIGN OF A SICK MIND" Not necessarily true but often indicative of at least OCD, etc At least in my case...

I presume the new relay did the trick nicely. Having it burn up is somewhat unusual for a relatively low mile bike. Maybe your elevated temps and a lot of frequent stop - starts had something to due with it. A clean bike is usually a happy bike, and gives you the opportunity to give it a close-up inspection that could catch minor issues before they become major warts. The tire air loss is strange and hopefully was an anomaly. And why is it a she? Yes, it may be weird to ride a guy for some but I think of my bikes as appliances and not a manifestation of a life form. That way no ill will can be interpreted between us if something goes haywire or breaks. Plus more than likely a failure is due to improper or inadequate maintenance, misuse or just circumstances (bad luck if one adheres to such reasoning). It is the Engineer's "Way"...

I'm not sure I would bother with the brake light kit just adds more things to go wrong Light is the key but if you want a rear brake light a cheap peel and stick red LED light strip can be connected easily and taped to the edge of the top case rack. I drill holes and add little zip ties because it's really hard to stick to polyethylene which is what most of the racks are made out of I'm not sure about the aluminum rack from GV

For Shad, even between sizes, the racks are different. It can be confusing which rack fits which box. My SH46 rack works with the SH29 box but you must check interchangeability. No idea if the Yami boxes even fit the Shad racks but you'd think they would!!!

I have the SH46 and 29 Shad top cases and the SH36 paniers. They're pretty bulletproof and water tight but more than anything else they're light. I don't understand these guys who have these aluminum top cases in side cases. First of all , usually they're like a barn door aerodynamically , but they're friggin heavy as hell I rented FJ09 in San Diego and it had these aluminum units that just carrying them empty hurt my arm. The top case was so heavy and it wasn't that big, allmost lifted the front wheel off the ground when it was on the center stand, empty! No I bought my SH46 probably 12+ years ago, which fits on multiple bikes it was under $130. Then when I got the FJ I got the SH36 in 2016, and with the mounts for the top case and paniers it was under $650. I've since got the SH29 because the 46 seemed out of proportion for what I needed in it. It was $100 Shipped from Revzilla. On sale now at Shad 🇺🇸

Not that likely it will be needed but I've heard Amazon doesn't cover warranty claims, and the manufacturer doesn't if you by it on Amazon?! But it sounds like you got ripped off?

Not sure if shipping for the Yuasa would make it work it but I'm at 60076 It's looks like it's been prefilled? How does that work with shipping and of course how fresh is it? Unusual too see a MIN (Made In Nippon) battery here.

Paddy in Surrey UK When I try to think back, which for me is never easy, about what things cost 50 years ago, compared to today, it just adds to the cranial memory bank overload. Even more mind boggling is what myself and I'm sure my peers were making per hour in 1973, for example. Full time as a architect intern, being the flunky "make 14 copies of this 48 x 60 set of 20. Then render 3 of the sets using this color number legend. Then roll them up in sets except for the rendered sets, of which you roll on a tube 2 of the rendered sets and hop on your motorcycle and get them to the (then San Francisco) Airport. Asa and Sam will meet you in front at 5 pm. I heard on the radio that the 101 was jammed, so get crackin." I looked at the clock in the blueprint room and it said three o'clock. Obviously I didn't make all the sets and just made two sets and rendered them and split for the airport. First time I split lanes the whole f****** way. And if you knew the old 101, it was scary as hell cause half of it was elevated. And as I clenched my teeth in my full face Shoei, the first full face they imported into the united states, I said To myself "I'm doing this for $2.75 an hour?!!! And that was after I got a raise after six month. So is our buying power better now or then?

I guess I was not clear that I also have the -02 cable I installed years ago (and before the original design failed like it did for others); though it's no longer than the original version. I even have a new spare -02 clutch cable in my "attic stock"! I guess it may be up for sale here soon, along with extra rear brake pads and fork wipers & seals I bought mistakenly not knowing a pair was in each box. The Renthal Street Naked are well up & back from stock (I have the dimensions in a folder), plus they have more sweep backward. I also have the OEM risers in the "back" orientation. All I know I need likely 3" more slack or I'm not (eventually) going anywhere.

I've tried a 2014 Yamaha R1 clutch cable. It works but it doesn't have the Gradual ninety degree steel tube at the top Like the second generation clutch cable for Generation one and generation two FJ/tracers. I have not contacted someone like Motion Pro who make custom cables to see how much one would cost and delivery time (not that I'm going to be riding until mabe June) I only need about 2~3 more inches with the Street Naked bars and +1" up & .75" back riser adapters I have. All the electric looms, throttle cables and Speigler brake line have enough slack. Has anyone found a suitable clutch cable off the shelf? Thanks for You're input

So you and your sister are good kids nice to hear I hope my kids do the same if necessary but I can wait However my poor wife has to help me after surgery as I did her I moved here for love that was 43 years ago but I wasn't really the most enamored with the Bay area other than its proximity to Yosemite and Tahoe I think it was in '73 it rained 60 some odd days straight you needed a scuba suit mask and snorkel to ride So I got smart and moved to San Diego now that was sacrifice moving here If you got a garden hose and somewhere to keep your bike from freezing rinse it off and then hit it with a dilution of the protectorant with a little kerosene And girl if you haven't go get yourself some heated gear Head to toe Maybe some of the thin new heated base layers including socks you already got heated grips get some grips At least you're not far from the Ozarks

So did you get out

I built my own VRR inexpensively years ago and even then I've had one go out I used a Kawasaki 600 unit my biggest problem is intermittent starting which I discussed the only other soft spot on the VTR was their cam chain tensioners which most resolved decades ago with manual cam chain tensioners The original super hawk was a 305 that's why I refer to the VTR as the vtr1f My vtrs and I have probably six extra sets of carburetors are the largest Honda put on ANYTHING WHEN YOU'RE RUNNING THE BIKE WITHOUT THE AIR BOX LID AND FILTER OUT YOU WANT TO KEEP SMALL CHILDREN AWAY BECAUSE OTHERWISE THEIR HANDS WILL GET SUCKED IN

The front 2 plugs I used up, 1 for my RD and the other I don't recall now. They're only 2 amps which you can push to 3 but not 5. I must have at least 10 seperate added circuits.

Yes, tail light, front TS running light (right front side cowl), etc. As you know you Could use a relay and tap the battery for juice. I have several added circuits as well which all incorporate a relay; sometimes 2 circuits off one relay. There were so many circuits on my VTR, fed off a + & - buss bar, each with their own inline fuse and relay, it finally became so congested with spaghetti wiring, I obtained a device that incorporates I think 6 or 8 circuits with built-in fuse slots which can be selected to either be switched or battery. I can check and post whose it is, as I shopped around a fair bit before selecting the one I did. It also was the smallest, and I believe could handle up to 60 amps total. That way you need only 1 battery and ground connection and one switched input.

I have a similar issue with my VTR. Drove me crazy! At first I thought it was a bad sidestand switch. Replaced it after testing and even jumpering around it. I then presumed it was the starter relay. The starter itself is down low in front. Poor design weather exposure wise. After 111,000+ miles I think it may be a dead spot on the armature or stator. At least it's easy to get to. Also I have NOS for all these parts including the relay and starter in my attic stock. Enough to build another bike less wheels & brakes, plus I have another fastest red 98 in the stable. Electrical gremlins are the hardest often to rectify (pun)!

Mr D Given the post immediately prior to yours, karma may demand you refrain from using the term "fire starter " when referring to your battery. In regard to your diagnosis of your current battery's apparent failure, I concur. I stopped a few years ago keeping my batteries on my "battery tenders" when not on the road. Instead, I closely monitor their state of charge, and when they drop below 12.88V, I then put them on a tender for a couple of days. I too have observed a slight drop-off in the performance of the OEM Yuasa YTZ10S in my 15, which concerns me. I will monitor it more closely over the winter (Winter? what winter? Other than a 10 day sub-zero stretch followed by a wet, gloomy 10 day run... Not complaining but what's with our crazy 3 week string of mild sunny days? Today it'll be 61 !!!?). I'm expecting needing a new energy box this summer, as 9 years could be a record even fir me. Again, not complaining. As to going with a Lifpo, TBD but the NOCO is attractive; I have their Genius 2 smart charger already. But I've had such good service from Yuasa since 79 or earlier, I'm reluctant to diverge from LAGRT for "lithium", especially given our northern climate... Whatever you decide though, we'll support you but I'd not heard of SSB until now. https://batteryspecialists.com.au/blogs/news/the-definitive-guide-to-ssb-lithium-batteries#:~:text=Common Faults with the SSB Lithium Batteries,-Most of the&text=There is a safety feature,the battery from over-discharging

Interesting. So you swear by them? ☺️ Do you use the "Mute" insert? Which ear tip do you like, the silicone of foam. I've used Howard Leight Laser Lite's for likely 15+ years. Low pressure and so the job for me. I can wear a pair 3 - 4 times. When I feel really Scottish, I wash them and they're good another couple times!😁 https://www.amazon.com/Honeywell-Visibility-Disposable-Earplugs-200-Pairs/dp/B0007XJOLG?th=1 200 pairs for only the cost of a burger over one pair of Loop Exp+ Maybe when my latest box of Lasers is used up; in about 2027...

You still have mc shows?! The IMS indoor shows folded their tents 4 years ago. They tried outdoor 1 year after and that was it 😔

Brian What the heck is the stock # of links again I guess I'll have to look in my shop manual cuz the owners manual pdf in my phone doesn't give it?!

I feel the need Unfortunately I cannot fulfill it Friday it was 59° At least I spent the day outside