Duke

The OEM settings only provide 3 levels of heat regardless of the number of levels shown in the menu. I know because I took the measurements. I am positive that the OEM grips are great, but I didn’t care for the cost or the lack of choice in grips. Doing aftermarket heated elements means I can us whatever grips I want.

I’ve actually read about someone doing that very thing and it worked just fine. That’s part of how I came up with my idea. Unfortunately you would only have the same heat level for your jacket and gloves. This is why I run my grips on the factory menus.

Im glad things worked out. As for the thanks, I’m just returning one of the many favors I’ve received over the years. It feels good to be able to do that.

I’m sorry for not responding sooner, but hunting season is upon us so I’ve been busy elsewhere. As stated earlier, you can reuse your grips if you’re careful. I did. I took the measurements at idle. Since we’re dealing with PWM, the heat output will not change. The heat output would only change if you changed one of the variables in Ohm’s Law. The resistance is fixed, the voltage is fixed, so the current and subsequently the wattage are fixed. As for my the uneven heat between the grips, I did put heat shrink on the left grip when I installed it, but there simply isn’t room to put more. My only viable option is to wrap the bar end in heat shrink or electrical tape during cold weather riding. The other option is to remove them in cold weather, but I don’t like that option.

Mine is a 2015 too, but while I can alter the setting for each of the three levels, when I measure the actual output of each setting only levels 3, 4, and 5 are different. 1 & 2 are off. 6 thru 10 are 51.5% duty cycle. I can only presume that yours are the same if you measure them with a meter that shows PWM duty cycle.

I’m envious. Well done!

I’ve most recently bought from Pro Caliber, but I usually start by looking on eBay and Amazon.

That’s exactly what I do. Works like a champ every time.

Thanks for posting that. You confirmed my suspicions that Yamaha only allows 3 heat levels, even with the factory grips. Interesting that they offer 10 levels of adjustment with most being the exact same pulse width.

Because it’s there, and you only live once. Having said that, I only hope that I get the opportunity one day. If I don’t, I won’t lose any sleep over it. I guess I just like the idea of riding in remote places.

I hear the fan run practically every day. It typically kicks on as the temp nears 200 degrees. I would check the connector to make sure its securely connected. I’d also check to make sure the fan spins freely. I’ve ridden two up in hot weather and had no problem with overheating. I hope your problem has an easy fix. Duke

The only part of my gear that isn’t waterproof (Goretex) are my gloves. If I’m going to ride for a long time in rain, I put on my Aerostich triple digit rain covers. Otherwise I’m lucky that I don’t have to worry about rain gear.

Riding home yesterday I got to educate a cager on proper merging. I was cruising along in the left lane in the interstate with a semi in the center lane a couple of car lengths ahead of me. I was gaining on the truck, but not flying past him because we were coming into a heavily patrolled section of road. Cars were merging from an on-ramp, and a minivan decided to merge immediately into my lane without looking. Fortunately I saw that this was likely to happen, so I was already decelerating. When she blindly merged into my lane I gave her a couple short taps from my horn, which is definitely not stock. She immediately thought she had cut off someone in an old Buick, not a motorcycle. When she glanced over her shoulder and saw me she clearly mouthed “Oh $h!t” and proceeded to swerve back and forth like a fool. It was pretty apparent by her behavior that she has been on a motorcycle and knew that she had done something incredibly stupid. Hopefully she learned a lesson to look, not just listen for motorcycles. Loud pipes don’t save lives, conscious and considerate driving does.

I finally had an opportunity to take some measurements of the PWM duty cycle for each of the 10 levels available on the menu, and what I found surprised me. 10=51.5% 9=51.5% 8=51.5% 7=51.5% 6=51.5% 5=51.5% 4=31.5% 3=21.4% 2=0% 1=0% So basically there are only 3 levels of adjustment. I would be extremely interested in taking the same measurements with factory heated grips to see if the percentages are different. Also, I figured out why my left grip doesn’t get nearly as warm as my right grip. Can anyone say, “Massive heatsink?”

I used the clutch side heat shrink too, but I am still surprised at how much difference there is between the two grips. It's not a huge issue, but I suppose it's worth mentioning.

I did receive my Scorpion slip-on, and I installed it this weekend. It looks and performs great on the bike. I will say that it is actually louder than I expected, especially with the baffle removed. With no baffle, it's louder than my wife's CBR954RR with a Two Brothers Racing pipe. With the baffle in place, it's about the same volume, but has a deeper sound. I'm satisfied with the sound of pipe. Not so obnoxious as to upset the neighbors, but loud enough to be heard over other engine noises.

Hey Chitown, I haven't taken measurements yet, but I will as soon as I get my hands on a capable multimeter. That might even happen later this week. I also had a chance to ride with my grips yesterday. It was about 60 degrees and cloudy, so I didn't actually need to run the grips, but I did want to experiment with them. I'm still working out the settings for low/med/high, but I do find them to be very warm. In fact, with just leather gloves on, I had to turn them to low and then stop to adjust the low setting to keep from roasting my hands. I find that the left grip heats slowly, which is certainly due to the heating element being in nearly direct contact with the metal handlebar. Other than that, they work just fine. They will be a nice complement for my Gerbing heated gloves because the gloves are an older model with no heating element in the palms. When combined with heated grips, they work perfectly. I'll post again once I have the duty cycle readings. Then I'll take the time to create a proper how-to post for this. Duke

Great review. This is what I use. Ear Plugs | Earplugs | Mighty Plugs EARPLUGSONLINE.COM They’re available on Amazon too. Really comfortable. One “wad” makes two ear plugs and will last for weeks.

If you have a time stamp on the picture and can tell them where you were, they will know exactly which truck it was, who was driving it, and how fast it was going. I would report it.

Welcome to the site, and I’m sure you’ll be able to find the source of the problem with some simple troubleshooting. Check the obvious...fuse, loose connection, bad switch, etc. Once you have them working, you should be able to use them as daytime running lights. Let us know what you find. We’ll help if we can. Just know in advance that the fuses for those lights might not be located in the main fuse box. There are some additional fuses located behind a panel on the right front of the bike. More details can be found with a couple of searches on the site. Duke

A lot has transpired since my last post, but I'll bypass the pointless details and go straight to the pertinent information. I received this email from Chris at pedstop late on Tuesday evening: Hi Darrin Apologies for the lack of communication and delay in the order. We have changed servers and have missed quite a portion of emails sent to the sales@ address without knowing, this also affected our mobile site which we have realised today. Your order is not affected by our closing down statement and we will likely be trading the amount of stock that we have for at least the next 12 months. I’ve attached a screen grab of your order which is still pending with Scorpion, as the product description mentions we don’t hold stock, as an order comes in we order it direct with the manufacturer and then send it once received. Scorpion are in their busiest period at the moment so they are a little slower than normal. We will chase them tomorrow and find out when it will leave. If this is not acceptable please let us know and we get the order stopped before they ship. Again apologies for not seeing your mails and for the panic regarding closing, we are a trustworthy company that has a excellent reputation, this will continue to the end. Regards Chris Then this morning I had another email stating that my part had shipped. I checked with FedEx, and sure enough, the part is on its way with an expected delivery of Monday, May 20th. Presuming that the delivery goes well, all is once again right with the world. Clearly pedstop was experiencing technical problems, and those happen. Also clearly, they honored their word and the part is on its way. I will now humbly retract my previous rants about Adrenalin-pedstop as a vendor. I will also suggest that members watch their website for bargains, especially members in GB. I don't know how much stock they have on hand for our bikes, but I suspect there will be bargains to be found on whatever they have. I'll post an update once I have my exhaust installed, which will likely happen over Memorial Day weekend. Thanks, Duke

Interesting story for sure. I’m actually still surprised that it had that much damage. Guys drown motorcycle engines pretty regularly, and generally get away with pulling the plug to clear the combustion chamber and changing the oil. I’m not saying that the engine doesn’t suffer some damage, but they can usually be made to run. Not that it makes any difference whatsoever, because your engine obviously didn’t like ingesting water. Really a bummer no matter what.

KLRs die? That’s contradictory to everything I’ve read on the internet, so it can’t possibly be true.

Here's a link to a thread on running the Oxfords with the OEM controls. Lots of good information in there as well, including information about the correct connectors to use. And here's a thread on Adventure Riders for the Super Tenere. More good information there that applies to us because the S10 uses the same menus and such to drive the grips. Heated grips. | YamahaSuperTenere.com WWW.YAMAHASUPERTENERE.COM They are $399 MSRP. A 2 hr install by dealer. They are supposed to integrate with the menu rocker switches to operate. I bought a set but have not had them installed...

It’s more fun to ride a slow bike fast than to ride a fast bike slow, so I would choose the smaller displacement and lighter machine. That’s just an opinion based upon where I would spend my money. It’s also based upon my level of ability and experience. You might choose differently, and there is nothing wrong with that.