Heli ATP

FOBO 2 TPMS for three wheels... Bluetooth 5 TPMS for 3 WHEELERS FOBO 2

I have one battery maintainer for two bikes. I switch back and forth so each battery gets about 3 days at at a time a few times a month. I keep meaning to get a multi bank tender to cover car and bike batteries etc., so the search is on.

I had a McCruise on my 2017 FJ-09 and loved it. It didn't have as many limitations at the stock version, such as only use in 4th,5th&6th gears between 31+100mph. However I prefer the stock cruise control on my Niken with the integrated controls. Having said that if the Niken didn't have cruise control I would have wanted a McCruise. As previously mentioned the McCruise Controls take up valuable handle bar space, unless installed such as Dazzler24 did in the following post.... McCruise with stock buttons and if anyone want to follow Dazzler24's lead I have the parts you need for sale in the classifieds 😉 Cruise Control pod buttons

Here is one that is painted... https://www.ebay.com/itm/185205714177 https://www.colorrite.com/

Hope you dont need to go this route but eBay may have what you need for $500. Good Luck ebay search yamaha 900 ECU

Year /Model ? You make have a sticky rear brake switch, clean it and you may be good to go. Otherwise is your cruise control stock or aftermarket, and what kind of levers do you have?

Mo Cycle prices released. Jeans and vest combo seems like a good price... Airbag jeans price $445 We will launch the Mo'cycle Airbag jeans in just a couple of weeks, reserve your Airbag jeans today and enjoy the lowest price possible $445! Airbag jeans, reserve price: $445 (save $150 USD, retail price $599) Airbag jeans + Airbag vest, reserve price: $799 (save $500, retail price $1299) MoCycle

It even works for the NIKEN... ABBA SkyLift

I wanted to see if a standard tank ring (not offset) would fit on the Niken so I picked up a SW Motech tank ring model TRT.00.640.11000/B. With the City bag installed full lock of the bars is restricted. With the Engage bag installed the bars just make contact with the sides of the bag. I dont have the smaller Micro bag but my calculations suggest it would fit without causing a restriction using the 640 ring. The CITY bag I purchased was a display model and had the top ring was installed so as to move the bag all the ways back towards the seat. Combined with the offset tank ring it was to close to me for comfort. Since the 640 ring didn't solve the problem I repositioned the top ring on the bag to move the bag fully forward and now everything feels good. Here is a pic of the 640 ring installed with bars at full lock....

It's common and has been discussed in depth. Search this site for clutch rattle. Good Luck.

2019 Niken is a huge improvement over the 2017 FJ-09 in throttle response.

Welcome to the forum.

3??

Welcome from an Itchy Boots fan, enjoyed when she rode Denmark. Denmark

The cheapest option is free, if she wears ear buds connected to her phone you can call her from yours.

Never had a Top Sellerie seat but had the same issue with a Corbin seat. The following thread discusses same and shows solutions... Tight fitting seat

Welcome to the forum. On the main page scrool down to FJ-09 Tech Tips/How to's

Looks like the Honda Neowing F4 Hybrid is a go? Honda Neowing

Got in a couple of hours today as temps were high 40's. Very happy with the Powerbronze screen now that it's 2 inches shorter (see post above). I can see over the screen and still let my helmet visor open doing 70 on the highway. I wasn't able to tell if there was less noise as I had a balaclava on under the Shoei helmet. Also this was my first ride with the SW-Motech City tank bag installed. I was expecting it to get in the way but I didn't even notice it once I got going. Tomorrow will be cleaning day, I didn't see any real bad spots on the road which you would expect this time of the year. Not having been out in a few weeks I got the menus mixed up. Heated grips were on three and were way too hot. I adjusted them and they didn't cool down. When I looked down I had changed into mode 1 instead of heated grip level one. Another reason to get out more. 😆

I like it. You will have to paint the beak to match when you add it. Oh.. the Beak 🙄

It looks like #12 in the diagram... Coolant drain plug on waterpump

I was on the lookout for a SW-Motech Engage Tank Bag but settled for the City one as the EVO ringed Engage is out of production. The tank ring for the Niken is an off-set type and I was afraid it would push the bag too far aft for comfort. The bag I purchased from SW- Motech was a return and was setup for aft position installation. I moved the hardware under the bag to have it sit further forward. The aft position was a bit close to my body and while manageable it might have been a little cramped when wearing full rain gear. The forward position looked a lot better and gave me more room to scoot forward on the seat, which I need to do often when stopping on uneven ground with my short inseam. As it turned out I found an EVO Engage bag which is a little smaller and I should have it next week. I will decide if the off-set tank ring works well with it, or if I will try a standard tank ring which sits on top of the fuel cap. I looked up the part number for the Niken fuel cap and found it is used in many different Yamaha Motorcycles. 39P-24602-00-00 This should help in finding a standard (non off-set) ring as the EVO parts are becoming scarce. SW-Motech's new line to replace the EVO is the PRO and that line does not appeal to me even though they are said to be water proof. No restriction with turning handlebar full left or right with city bag installed in forward position.

Jump ahead to minute 8:30 Heated Grip Connector

Here it is... Motorcycle Rear Luggage Rack Carrier For YAMAHA MT-09 Tracer FJ-09 2015-2017 MT-09 / FJ-09

Nice, that video gets interesting at the 4 min mark.