quaxum Posted December 11, 2019 Share Posted December 11, 2019 3 minutes ago, dazzler24 said: Ok I see what's happened here. Your question @quaxum was whether the tools would slot into the underside of the passenger seat like the OEM one does - correct? I was attempting to answer that question with my reply. The only unknown is whether the later models are configured similarly and I'm assuming they are but I put it out there for those that have your model to respond. Hope that clarifies what I meant. 🙂 Cheers Yea! Thanks and cheers mate! 1 Link to comment Share on other sites More sharing options...
wordsmith Posted December 11, 2019 Author Share Posted December 11, 2019 6 hours ago, quaxum said: Just one more question, does the pillion seat come with the slots for u to put the tools like the stock seat? The 'tools' you mention comprise nothing more than a small black plastic screwdriver handle and - clipped-in separately - a double-ended screwdriver 'stem' that slides into the handle for use. Hardly worth bothering about - and as said, you could surely find room for it - or its equivalent - elsewhere on the bike. 1 Riding a fully-farkled 2019 MT-09 Tracer 900 GT from my bayside home in South East Queensland, Australia. Link to comment Share on other sites More sharing options...
DeltaHotel Posted March 18, 2020 Share Posted March 18, 2020 @wordsmith or @roadrash83 ... curious, can you provide any guidance on best site for ordering these seats ,and how... I visited motostorm.it and chromeburner.com, and while I see some 'ready' configs on bagster seats, I don't see this specific build (pictured at top of thread) nor do I find a configurator. Any tips or advice would be appreciated (what the specs are on that seat, and how you ordered)... thanks so much. Link to comment Share on other sites More sharing options...
Supporting Member roadrash83 Posted March 19, 2020 Supporting Member Share Posted March 19, 2020 @DeltaHotel I bought the Bagster seat with out the Bultex foam, not on purpose. But because of the confusion about ordering on Chromeburner.com site ( I'm still very happy with it). They have a phone number on the site that you can call. Hope this helps! He who dies with the most toys wins. Link to comment Share on other sites More sharing options...
suncoaster Posted March 20, 2020 Share Posted March 20, 2020 Bought one from Motostorm a month or so ago, then rode 5200km on it over 3 weeks. After the first day I put my sheepskin on it. I found it much better than the stock seat. Link to comment Share on other sites More sharing options...
suncoaster Posted March 20, 2020 Share Posted March 20, 2020 Another of the Bagster seat with sheepskin in a faraway place. 1 Link to comment Share on other sites More sharing options...
Supporting Member dazzler24 Posted March 20, 2020 Supporting Member Share Posted March 20, 2020 7 hours ago, suncoaster said: Another of the Bagster seat with sheepskin in a faraway place. That looks like a classic outback Aussie street!? Somewhere in country NSW I'm guessing? Link to comment Share on other sites More sharing options...
wordsmith Posted March 20, 2020 Author Share Posted March 20, 2020 On 3/19/2020 at 8:34 AM, DeltaHotel said: @wordsmith or @roadrash83 ... curious, can you provide any guidance on best site for ordering these seats ,and how... I visited motostorm.it and chromeburner.com, and while I see some 'ready' configs on bagster seats, I don't see this specific build (pictured at top of thread) nor do I find a configurator. Any tips or advice would be appreciated (what the specs are on that seat, and how you ordered)... thanks so much. Simply go to the BAGSTER site, where you can configure the seat to suit your tastes and budget. Riding a fully-farkled 2019 MT-09 Tracer 900 GT from my bayside home in South East Queensland, Australia. Link to comment Share on other sites More sharing options...
suncoaster Posted March 22, 2020 Share Posted March 22, 2020 @dazzler24 Yes, you're right. It is Sofala, which linked up with the Bylong Valley is now my favoured way to bypass Sydney en route to the southern states. 1 Link to comment Share on other sites More sharing options...
wordsmith Posted March 22, 2020 Author Share Posted March 22, 2020 19 minutes ago, suncoaster said: @dazzler24 Yes, you're right. It is Sofala, which linked up with the Bylong Valley is now my favoured way to bypass Sydney en route to the southern states. My preferred somewhat scenic and very pleasant and good-riding route to Vic from Bris, avoiding most larger towns is to Armidale: thence to Mudgee: thence to Canberra: thence to Lakes Entrance via Cooma and Cann River: thence to Melb. Or - shorter overall ride - Canb to Melb down the Hume Hwy to Melb. Just try to avoid the mind-numbingly boring Newell Hwy. 1 Riding a fully-farkled 2019 MT-09 Tracer 900 GT from my bayside home in South East Queensland, Australia. Link to comment Share on other sites More sharing options...
DeltaHotel Posted April 3, 2020 Share Posted April 3, 2020 On 3/20/2020 at 1:43 PM, wordsmith said: Simply go to the BAGSTER site, where you can configure the seat to suit your tastes and budget. @wordsmith and @roadrash83 thank you... So I'm just about ready to pull trigger, but I must decide between seats in stock at Chromeburner (they have either all-silver piping and lettering, or all-blue stitching and lettering), or order from Bagster (through Chromeburner) to get the blue piping and silver lettering. Sadly the blue/silver combo order will run me about $80 US more. But I do like that look. So my question is ... does that blue piping match relatively well with the blue on the bike? If you had it to do over, would you stay with blue there, or you think it may look better to keep piping silver like the lettering? Thanks so much for your feedback. Link to comment Share on other sites More sharing options...
Supporting Member roadrash83 Posted April 3, 2020 Supporting Member Share Posted April 3, 2020 @DeltaHotel The blue looks good on my bike and I'm still happy with the seat. He who dies with the most toys wins. Link to comment Share on other sites More sharing options...
DeltaHotel Posted April 3, 2020 Share Posted April 3, 2020 13 minutes ago, roadrash83 said: @DeltaHotel The blue looks good on my bike and I'm still happy with the seat. Thanks @roadrash83 ... appreciate the feedback. It looks like a close match in the pics here, but that blue on the bike is a bit of deep purple, so wasn't sure how well it matched. Thank you again... and take care. Link to comment Share on other sites More sharing options...
quaxum Posted May 13, 2020 Share Posted May 13, 2020 Bought myself a bagster as well. The seat pan looks like its 3d printed? thoughts? Link to comment Share on other sites More sharing options...
Supporting Member dazzler24 Posted May 13, 2020 Supporting Member Share Posted May 13, 2020 2 hours ago, quaxum said: Bought myself a bagster as well. The seat pan looks like its 3d printed? thoughts? I would have thought that the pans are moulded in some way. At least mine looks that way?! I have an FDM 3D printer and my seat pans are definitely not made that particular 3D printed way. Resin printed - maybe? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now