Brentinpdx Posted January 29, 2023 Share Posted January 29, 2023 When I bought my Fj09 it came with this huge Puig touring screen. Looked really odd, and it felt weird pushing the wind. Made the front end seem unstable. I like to ride fast. Put the stock screen on. Terrible. I'm 6'2" and the screen made the buffeting on my helmet more than I could stand. Even with it lowered to the lowest setting it was awful. I figured out that it needed to be lower by 2" at least. I bought a smoke tinted Puig racing windscreen. Its was 15" high. Set at the lowest setting. My helmet has clean air to go through and the is a slight burble against my shoulders. Almost cant tell. 1 Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted January 29, 2023 Supporting Member Share Posted January 29, 2023 16 minutes ago, Brentinpdx said: When I bought my Fj09 it came with this huge Puig touring screen. Looked really odd, and it felt weird pushing the wind. Made the front end seem unstable. I like to ride fast. Put the stock screen on. Terrible. I'm 6'2" and the screen made the buffeting on my helmet more than I could stand. Even with it lowered to the lowest setting it was awful. I figured out that it needed to be lower by 2" at least. I bought a smoke tinted Puig racing windscreen. Its was 15" high. Set at the lowest setting. My helmet has clean air to go through and the is a slight burble against my shoulders. Almost cant tell. Agreed, I use a short sport flyscreen as well and the air is very clean and smooth. Even in Winter, I prefer the smaller screen now. 2 ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
Premium Member 2and3cylinders Posted January 29, 2023 Premium Member Share Posted January 29, 2023 Sexy 1 Link to comment Share on other sites More sharing options...
Wintersdark Posted January 29, 2023 Share Posted January 29, 2023 2 hours ago, Brentinpdx said: When I bought my Fj09 it came with this huge Puig touring screen. Looked really odd, and it felt weird pushing the wind. Made the front end seem unstable. I like to ride fast. Put the stock screen on. Terrible. I'm 6'2" and the screen made the buffeting on my helmet more than I could stand. Even with it lowered to the lowest setting it was awful. I figured out that it needed to be lower by 2" at least. I bought a smoke tinted Puig racing windscreen. Its was 15" high. Set at the lowest setting. My helmet has clean air to go through and the is a slight burble against my shoulders. Almost cant tell. Hahaha yeah the stock windscreen is hot garbage. Few years into my 2019 now and I'm a strong believer that a minimal windscreen is the way to go - I don't understand people's problem with wind, as long as it's consistent and not buffeting you can just lean against it and it doesn't tire you. The stock windscreen though in any position seems specifically designed to maximize buffeting directly on the helmet. I suppose giant might work for some strange people, but that'll never be the way for me to go. I went with the Puig sport and never looked back. Far, far better. 1 1 Link to comment Share on other sites More sharing options...
Ride On Posted January 31, 2023 Share Posted January 31, 2023 Mounted my rear Ohlins shock today. A bit of a PITA but it's done. Front NIX30 cartridges are next but not for a couple weeks or so. -17°F tonight, with 30 some inches of snow on the ground, so no hurry. 75°F+ working in the basement. 4 3 Link to comment Share on other sites More sharing options...
nhchris Posted January 31, 2023 Share Posted January 31, 2023 (edited) Interesting. The stock black spring looks heavier duty than the Ohlins spring, Edited January 31, 2023 by nhchris 1968 Triumph Bonneville 650 1971 Norton Commando Roadster 2002 Harley 1200 Sportster 2003 Honda ST 1300 2016 FJ 09 Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted January 31, 2023 Supporting Member Share Posted January 31, 2023 28 minutes ago, nhchris said: Interesting. The stock black spring looks heavier duty than the Ohlins spring, And the overall eye-to-eye shock length looks shorter on the Ohlins as well. ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted January 31, 2023 Supporting Member Share Posted January 31, 2023 46 minutes ago, Ride On said: Mounted my rear Ohlins shock today. A bit of a PITA but it's done. Front NIX30 cartridges are next but not for a couple weeks or so. -17°F tonight, with 30 some inches of snow on the ground, so no hurry. 75°F+ working in the basement Once the weather clears up a bit you're going to have fun testing and tweaking. 👍 It should be better in all conditions but should really shine as you wick it up a bit. I find the harder I ride, the better the suspension feels, it just instills confidence to charge into (and then power out of) corners like its on rails at higher speeds. ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
Ride On Posted January 31, 2023 Share Posted January 31, 2023 52 minutes ago, betoney said: Once the weather clears up a bit you're going to have fun testing and tweaking. 👍 It should be better in all conditions but should really shine as you wick it up a bit. I find the harder I ride, the better the suspension feels, it just instills confidence to charge into (and then power out of) corners like its on rails at higher speeds. It will be fun to feel the difference. If it's better or not I'll report back here. Hopefully it's better because the stock suspension is not this bike's strong suit. It was okay, just not great. And beginning to feel harsh over sharp bumps. Two-up riding should be better as well with the ability crank up the preload, compression and rebound damping. 1 Link to comment Share on other sites More sharing options...
Premium Member 2and3cylinders Posted January 31, 2023 Premium Member Share Posted January 31, 2023 Watch for my pole regarding projects... I have been procrastinating starting mine though I did to winterizing oil changes, cylinder oiling, stabilizer and float bowl drains. My shop is heated but I'm preparing for San Diego.. Link to comment Share on other sites More sharing options...
draco_1967 Posted February 3, 2023 Share Posted February 3, 2023 The little used Cricut machine I bought is turning out to be a good purchase! I like how this turned out. It was a little tricky figuring out how to do the dual color decal with everything staying parallel, but it worked out. I still need to do the other side. I am curious to see how much lifting I get on the edges of the blocks. 3 2 Link to comment Share on other sites More sharing options...
Supporting Member texscottyd Posted February 3, 2023 Supporting Member Share Posted February 3, 2023 15 minutes ago, draco_1967 said: I must say, that turned out really well! Great job aligning with that flat part of the upper frame spar... it ties it all together very nicely. I'm impressed! Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted February 3, 2023 Supporting Member Share Posted February 3, 2023 1 hour ago, draco_1967 said: The little used Cricut machine I bought is turning out to be a good purchase! I like how this turned out. It was a little tricky figuring out how to do the dual color decal with everything staying parallel, but it worked out. I still need to do the other side. I am curious to see how much lifting I get on the edges of the blocks. That turned out great. The white tank and panels broken up by a little bit of red looks awesome. ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
Supporting Member dazzler24 Posted February 3, 2023 Supporting Member Share Posted February 3, 2023 @draco_1967 - Agreed, looking good! I wondered what practical use one of those Cricut machines would be good for and now I know. 👍 1 Link to comment Share on other sites More sharing options...
draco_1967 Posted February 4, 2023 Share Posted February 4, 2023 Thanks, Y'all! @dazzler24 I am finding the Cricut fairly easy to use with vinyl. I prefer a vector design program over their Design Space program, though you have to go through Design Space to send items to the cutter. Its not quite as useful as a 3d printer, but I'm sure I'll enjoy having it when I need custom decals. I bought it used at a significant discount, because I wasn't sure how much I'd actually use it. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now