krucymucy Posted December 23, 2018 Share Posted December 23, 2018 (edited) Finished rear shock today. I had to remove reservoir and complete side fairing to access the upper bolt. Edited December 23, 2018 by krucymucy Honda CB600F Hornet 2008; KTM LC4 640 SM Prestige 2007; Kawasaki Z1000 2007; Honda CB1000R 2010; BMW R1200GS 2010; Yamaha Tracer 900GT 2018; Yamaha TDM900 2002; Kawasaki KLX230 2020; KTM 690 Enduro R 2022: Bold = current Link to comment Share on other sites More sharing options...
Supporting Member texscottyd Posted December 23, 2018 Supporting Member Share Posted December 23, 2018 @krucymucy - You are in for a treat! That’s impressive suspension hardware, and it’s going to make a transformation of how your bike handles. Enjoy, and let us know your ride impressions. Link to comment Share on other sites More sharing options...
Supporting Member piotrek Posted December 23, 2018 Supporting Member Share Posted December 23, 2018 Converted my Skene Photon booster modules (formerly brake only) to the run/brake configuration, using this little gizmo. Prior to this I had my turn indicators configured as run/turn, using the same PWM modules. I did not like the run intensity behind the orange lenses, so I thought I'd try something else. For the indicators, I installed amber LED bulbs (600 LUM) behind clear lenses. Very happy with the setup. Skene modules under the top case base plate and clear lenses on OE perches. Location of PWM module... Lights in action... here. Link to comment Share on other sites More sharing options...
Ahmed Posted December 24, 2018 Share Posted December 24, 2018 On 12/21/2018 at 4:44 PM, betoney said: I used the same tape, after I applied it I briefly went over the surface with a heat gun. I have already posted this pic. but here is the red bike with silver accents. Hey Betoney, I like the lower red spoiler, would you have a link to the manufacturer? Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted December 24, 2018 Supporting Member Share Posted December 24, 2018 @Ahmed - Ermax.com Make sure you read the description carefully, they offer a 2 and 3 piece version and in addition they have solid colors or 2-tone like I have. ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
krucymucy Posted December 25, 2018 Share Posted December 25, 2018 Sweden was getting in the way of Great Britain so I had to move it to the other side ... Honda CB600F Hornet 2008; KTM LC4 640 SM Prestige 2007; Kawasaki Z1000 2007; Honda CB1000R 2010; BMW R1200GS 2010; Yamaha Tracer 900GT 2018; Yamaha TDM900 2002; Kawasaki KLX230 2020; KTM 690 Enduro R 2022: Bold = current Link to comment Share on other sites More sharing options...
Ahmed Posted December 25, 2018 Share Posted December 25, 2018 On 12/10/2018 at 6:14 AM, jdavis said: New engine bars Love it, exactly like mine except for the lights 😉, are the top ones the OEM fog lights? Link to comment Share on other sites More sharing options...
jdavis Posted December 25, 2018 Share Posted December 25, 2018 7 hours ago, Ahmed said: Love it, exactly like mine except for the lights 😉, are the top ones the OEM fog lights? LED's from eBay, 96 watts total, with a spread for going around corners. Link to comment Share on other sites More sharing options...
mellow Posted December 25, 2018 Share Posted December 25, 2018 Finally got my givi top box rack to mount the v46 and admore led lights. ST-Owners Link to comment Share on other sites More sharing options...
Ahmed Posted December 25, 2018 Share Posted December 25, 2018 2 hours ago, jdavis said: LED's from eBay, 96 watts total, with a spread for going around corners. This is a good idea.... I think I will do it too. I wanted to ask you about the 2 circular ones next to your windscreen, are these the Yamaha ones? I had handguards with lights on my previous bike and I found that Cars saw me even in rainy days when I had the handguard lights on because it's high and noticable. I would do the same light you have next to the windscreen but wanted to know your feedback. And closer pics 😉 Link to comment Share on other sites More sharing options...
Premium Member coachluciano Posted December 25, 2018 Premium Member Share Posted December 25, 2018 Santa brought me my last major upgrade to my bike. Bye bye stock windscreen. Hello Puig. 2015 FJ-09 - Andreani Cartridges, Ohlins 535 Rear Shock, LightTech Chain Adjusters, Yoshi Fender Eliminator, Blaster-X Integrated Tail Light/Blinkers, Full Yoshi Exhaust, Ivan's Flash, Bagster Seat, Rizoma: (Bar, Grips, Bar Ends, Mirrors, Oil Cap, Rear Pegs) Bremob Corsa Corta Master Cylinder, Bremob RCS19 Hadraulic Clutch, GPR Steering Damper, Speigler Hydraulic Lines, EBC Brake Pads, Puig Screen, HealTech Quick Shifter, MPG Rearset, XSR900 Slipper Clutch, Driven Racing Halo Gas Cap, SW-Motch Front / Rear Axel Sliders, R1 Rotors / 320mm Kit Conversion. Link to comment Share on other sites More sharing options...
Supporting Member betoney Posted December 25, 2018 Supporting Member Share Posted December 25, 2018 2 hours ago, coachluciano said: Santa brought me my last major upgrade to my bike. Yeah...sure... We've heard that one before. 😄 ***2015 Candy Red FJ-09*** Link to comment Share on other sites More sharing options...
Supporting Member texscottyd Posted December 25, 2018 Supporting Member Share Posted December 25, 2018 1 hour ago, betoney said: Yeah...sure... We've heard that one before. 😄 I ain’t buying it for a second. I tried that line with my wife, and she actually congratulated me for telling the joke without cracking a smile... Link to comment Share on other sites More sharing options...
Premium Member coachluciano Posted December 25, 2018 Premium Member Share Posted December 25, 2018 3 hours ago, texscottyd said: I ain’t buying it for a second. I tried that line with my wife, and she actually congratulated me for telling the joke without cracking a smile... Speaking of that. What pads and rotors you running? Been meaning to ask you 2015 FJ-09 - Andreani Cartridges, Ohlins 535 Rear Shock, LightTech Chain Adjusters, Yoshi Fender Eliminator, Blaster-X Integrated Tail Light/Blinkers, Full Yoshi Exhaust, Ivan's Flash, Bagster Seat, Rizoma: (Bar, Grips, Bar Ends, Mirrors, Oil Cap, Rear Pegs) Bremob Corsa Corta Master Cylinder, Bremob RCS19 Hadraulic Clutch, GPR Steering Damper, Speigler Hydraulic Lines, EBC Brake Pads, Puig Screen, HealTech Quick Shifter, MPG Rearset, XSR900 Slipper Clutch, Driven Racing Halo Gas Cap, SW-Motch Front / Rear Axel Sliders, R1 Rotors / 320mm Kit Conversion. Link to comment Share on other sites More sharing options...
Supporting Member texscottyd Posted December 26, 2018 Supporting Member Share Posted December 26, 2018 7 hours ago, coachluciano said: Speaking of that. What pads and rotors you running? Been meaning to ask you Interesting you should ask... I have a brand new set of EBC XC 320mm rotors to be installed (hopefully) tomorrow. I’m using the caliper spacers that @pattonme had available to forum members, and new EBC HH pads front & rear. I’ve had the parts for a couple of months now, and finally finding the free time to complete the upgrade. Updates to follow... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now